|
27960
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
#!/bin/bash
# screenpipe_sync.sh
# Syncs Screenpipe SQLite data (vision + audio) to a NAS archive database.
# Append-only, no deletions.
#
# Key design points
# -----------------
# 1. Multi-install safe via install_id.
# Source IDs reset to 1 on every screenpipe reinstall. To avoid collisions
# in the NAS archive, every synced table gets an extra `install_id` column,
# and the logical primary key becomes (install_id, id) enforced by a
# unique index. The install_id is a UUID stored in
# ~/.screenpipe/.sync_install_id — wiping ~/.screenpipe/ (which is what
# happens on reinstall) discards it, so the next run generates a new one.
#
# 2. Schema-drift tolerant. If screenpipe migrations add new columns to the
# source DB, the NAS gets ALTER TABLE'd to match. Inserts use explicit
# column lists so positional mismatches can't occur.
#
# 3. FTS caveat. FTS tables in the NAS use source `id` as rowid. After a
# reinstall, INSERT OR IGNORE will silently skip rows whose id collides
# with a previous install's id, so FTS only reliably indexes the most
# recent install. Falls back to LIKE queries on the base tables for
# multi-install searches (which can filter by install_id).
#
# Usage
# -----
# ./screenpipe_sync.sh # syncs yesterday
# ./screenpipe_sync.sh 2026-04-15 # syncs a specific date
# ./screenpipe_sync.sh today # syncs today so far
# ./screenpipe_sync.sh --reset-install-id # rotate install_id and exit
# ./screenpipe_sync.sh --show-install-id # print install_id and exit
set -euo pipefail
# ─── CONFIG ───────────────────────────────────────────────────────────────────
DB_SRC="${SCREENPIPE_DB:-$HOME/.screenpipe/db.sqlite}"
NAS_MOUNT="${NAS_MOUNT:-/Volumes/screenpipe}"
NAS_DB="$NAS_MOUNT/archive.db"
NAS_DATA="$NAS_MOUNT/data"
Save modified buffer (ANSWERING "No" WILL DESTROY CHANGES) ?
Y Yes
^C Cancel N No
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27960
|
|
27961
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
#!/bin/bash
# screenpipe_sync.sh
# Syncs Screenpipe SQLite data (vision + audio) to a NAS archive database.
# Append-only, no deletions.
#
# Key design points
# -----------------
# 1. Multi-install safe via install_id.
# Source IDs reset to 1 on every screenpipe reinstall. To avoid collisions
# in the NAS archive, every synced table gets an extra `install_id` column,
# and the logical primary key becomes (install_id, id) enforced by a
# unique index. The install_id is a UUID stored in
# ~/.screenpipe/.sync_install_id — wiping ~/.screenpipe/ (which is what
# happens on reinstall) discards it, so the next run generates a new one.
#
# 2. Schema-drift tolerant. If screenpipe migrations add new columns to the
# source DB, the NAS gets ALTER TABLE'd to match. Inserts use explicit
# column lists so positional mismatches can't occur.
#
# 3. FTS caveat. FTS tables in the NAS use source `id` as rowid. After a
# reinstall, INSERT OR IGNORE will silently skip rows whose id collides
# with a previous install's id, so FTS only reliably indexes the most
# recent install. Falls back to LIKE queries on the base tables for
# multi-install searches (which can filter by install_id).
#
# Usage
# -----
# ./screenpipe_sync.sh # syncs yesterday
# ./screenpipe_sync.sh 2026-04-15 # syncs a specific date
# ./screenpipe_sync.sh today # syncs today so far
# ./screenpipe_sync.sh --reset-install-id # rotate install_id and exit
# ./screenpipe_sync.sh --show-install-id # print install_id and exit
set -euo pipefail
# ─── CONFIG ───────────────────────────────────────────────────────────────────
DB_SRC="${SCREENPIPE_DB:-$HOME/.screenpipe/db.sqlite}"
NAS_MOUNT="${NAS_MOUNT:-/Volumes/screenpipe}"
NAS_DB="$NAS_MOUNT/archive.db"
NAS_DATA="$NAS_MOUNT/data"
[ Exit cancelled ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27961
|
|
27962
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
#!/bin/bash
# screenpipe_sync.sh
# Syncs Screenpipe SQLite data (vision + audio) to a NAS archive database.
# Append-only, no deletions.
#
# Key design points
# -----------------
# 1. Multi-install safe via install_id.
# Source IDs reset to 1 on every screenpipe reinstall. To avoid collisions
# in the NAS archive, every synced table gets an extra `install_id` column,
# and the logical primary key becomes (install_id, id) enforced by a
# unique index. The install_id is a UUID stored in
# ~/.screenpipe/.sync_install_id — wiping ~/.screenpipe/ (which is what
# happens on reinstall) discards it, so the next run generates a new one.
#
# 2. Schema-drift tolerant. If screenpipe migrations add new columns to the
# source DB, the NAS gets ALTER TABLE'd to match. Inserts use explicit
# column lists so positional mismatches can't occur.
#
# 3. FTS caveat. FTS tables in the NAS use source `id` as rowid. After a
# reinstall, INSERT OR IGNORE will silently skip rows whose id collides
# with a previous install's id, so FTS only reliably indexes the most
# recent install. Falls back to LIKE queries on the base tables for
# multi-install searches (which can filter by install_id).
#
# Usage
# -----
# ./screenpipe_sync.sh # syncs yesterday
# ./screenpipe_sync.sh 2026-04-15 # syncs a specific date
# ./screenpipe_sync.sh today # syncs today so far
# ./screenpipe_sync.sh --reset-install-id # rotate install_id and exit
# ./screenpipe_sync.sh --show-install-id # print install_id and exit
set -euo pipefail
# ─── CONFIG ───────────────────────────────────────────────────────────────────
DB_SRC="${SCREENPIPE_DB:-$HOME/.screenpipe/db.sqlite}"
NAS_MOUNT="${NAS_MOUNT:-/Volumes/screenpipe}"
NAS_DB="$NAS_MOUNT/archive.db"
NAS_DATA="$NAS_MOUNT/data"
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27962
|
|
27963
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
#!/bin/bash
# screenpipe_sync.sh
# Syncs Screenpipe SQLite data (vision + audio) to a NAS archive database.
# Append-only, no deletions.
#
# Key design points
# -----------------
# 1. Multi-install safe via install_id.
# Source IDs reset to 1 on every screenpipe reinstall. To avoid collisions
# in the NAS archive, every synced table gets an extra `install_id` column,
# and the logical primary key becomes (install_id, id) enforced by a
# unique index. The install_id is a UUID stored in
# ~/.screenpipe/.sync_install_id — wiping ~/.screenpipe/ (which is what
# happens on reinstall) discards it, so the next run generates a new one.
#
# 2. Schema-drift tolerant. If screenpipe migrations add new columns to the
# source DB, the NAS gets ALTER TABLE'd to match. Inserts use explicit
# column lists so positional mismatches can't occur.
#
# 3. FTS caveat. FTS tables in the NAS use source `id` as rowid. After a
# reinstall, INSERT OR IGNORE will silently skip rows whose id collides
# with a previous install's id, so FTS only reliably indexes the most
# recent install. Falls back to LIKE queries on the base tables for
# multi-install searches (which can filter by install_id).
#
# Usage
# -----
# ./screenpipe_sync.sh # syncs yesterday
# ./screenpipe_sync.sh 2026-04-15 # syncs a specific date
# ./screenpipe_sync.sh today # syncs today so far
# ./screenpipe_sync.sh --reset-install-id # rotate install_id and exit
# ./screenpipe_sync.sh --show-install-id # print install_id and exit
set -euo pipefail
# ─── CONFIG ───────────────────────────────────────────────────────────────────
DB_SRC="${SCREENPIPE_DB:-$HOME/.screenpipe/db.sqlite}"
NAS_MOUNT="${NAS_MOUNT:-/Volumes/screenpipe}"
NAS_DB="$NAS_MOUNT/archive.db"
NAS_DATA="$NAS_MOUNT/data"
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27963
|
|
27964
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
#!/bin/bash
# screenpipe_sync.sh
# Syncs Screenpipe SQLite data (vision + audio) to a NAS archive database.
# Append-only, no deletions.
#
# Key design points
# -----------------
# 1. Multi-install safe via install_id.
# Source IDs reset to 1 on every screenpipe reinstall. To avoid collisions
# in the NAS archive, every synced table gets an extra `install_id` column,
# and the logical primary key becomes (install_id, id) enforced by a
# unique index. The install_id is a UUID stored in
# ~/.screenpipe/.sync_install_id — wiping ~/.screenpipe/ (which is what
# happens on reinstall) discards it, so the next run generates a new one.
#
# 2. Schema-drift tolerant. If screenpipe migrations add new columns to the
# source DB, the NAS gets ALTER TABLE'd to match. Inserts use explicit
# column lists so positional mismatches can't occur.
#
# 3. FTS caveat. FTS tables in the NAS use source `id` as rowid. After a
# reinstall, INSERT OR IGNORE will silently skip rows whose id collides
# with a previous install's id, so FTS only reliably indexes the most
# recent install. Falls back to LIKE queries on the base tables for
# multi-install searches (which can filter by install_id).
#
# Usage
# -----
# ./screenpipe_sync.sh # syncs yesterday
# ./screenpipe_sync.sh 2026-04-15 # syncs a specific date
# ./screenpipe_sync.sh today # syncs today so far
# ./screenpipe_sync.sh --reset-install-id # rotate install_id and exit
# ./screenpipe_sync.sh --show-install-id # print install_id and exit
set -euo pipefail
# ─── CONFIG ───────────────────────────────────────────────────────────────────
DB_SRC="${SCREENPIPE_DB:-$HOME/.screenpipe/db.sqlite}"
NAS_MOUNT="${NAS_MOUNT:-/Volumes/screenpipe}"
NAS_DB="$NAS_MOUNT/archive.db"
NAS_DATA="$NAS_MOUNT/data"
[ Exit cancelled ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27964
|
|
27965
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
#!/bin/bash
# screenpipe_sync.sh
# Syncs Screenpipe SQLite data (vision + audio) to a NAS archive database.
# Append-only, no deletions.
#
# Key design points
# -----------------
# 1. Multi-install safe via install_id.
# Source IDs reset to 1 on every screenpipe reinstall. To avoid collisions
# in the NAS archive, every synced table gets an extra `install_id` column,
# and the logical primary key becomes (install_id, id) enforced by a
# unique index. The install_id is a UUID stored in
# ~/.screenpipe/.sync_install_id — wiping ~/.screenpipe/ (which is what
# happens on reinstall) discards it, so the next run generates a new one.
#
# 2. Schema-drift tolerant. If screenpipe migrations add new columns to the
# source DB, the NAS gets ALTER TABLE'd to match. Inserts use explicit
# column lists so positional mismatches can't occur.
#
# 3. FTS caveat. FTS tables in the NAS use source `id` as rowid. After a
# reinstall, INSERT OR IGNORE will silently skip rows whose id collides
# with a previous install's id, so FTS only reliably indexes the most
# recent install. Falls back to LIKE queries on the base tables for
# multi-install searches (which can filter by install_id).
#
# Usage
# -----
# ./screenpipe_sync.sh # syncs yesterday
# ./screenpipe_sync.sh 2026-04-15 # syncs a specific date
# ./screenpipe_sync.sh today # syncs today so far
# ./screenpipe_sync.sh --reset-install-id # rotate install_id and exit
# ./screenpipe_sync.sh --show-install-id # print install_id and exit
set -euo pipefail
# ─── CONFIG ───────────────────────────────────────────────────────────────────
DB_SRC="${SCREENPIPE_DB:-$HOME/.screenpipe/db.sqlite}"
NAS_MOUNT="${NAS_MOUNT:-/Volumes/screenpipe}"
NAS_DB="$NAS_MOUNT/archive.db"
NAS_DATA="$NAS_MOUNT/data"
[ Exit cancelled ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27965
|
|
27966
|
Screenpipe — Archive
Screenpipe — Archive
All docs Screenpipe — Archive
Screenpipe — Archive
All docs · AFFiNE
All docs · AFFiNE
DXP4800PLUS-B5F8
DXP4800PLUS-B5F8
New Tab
New Tab
Screenpipe — Archive
Screenpipe — Archive
SQLite Web: archive.db
SQLite Web: archive.db
SQLite Web: db.sqlite
SQLite Web: db.sqlite
Claude
Claude
Manage extra usage for paid Claude plans | Claude Help Center
Manage extra usage for paid Claude plans | Claude Help Center
New Tab
New Tab
2 TB in 25 MB/s - Google Search
2 TB in 25 MB/s - Google Search
New Tab
New Tab
Close tab
New Tab
Customize sidebar
Close Google Gemini (⌃X)
Open history (⇧⌘H)
Open bookmarks (⌘B)
Bitwarden
AI Chat settings
Close
Google Account: Lukáš Koválik ([EMAIL])
Main menu
New chat
Share conversation
Open menu for conversation actions.
Conversation with Gemini
Conversation with Gemini
Copy prompt
Edit
You said nano how to delete all. How to jump to line
You said
nano how to delete all. How to jump to line
Listen
Show thinking
Gemini said
Gemini said
Here is how to perform both of those actions in the
nano
text editor.
How to Delete All Text
How to Delete All Text
Nano does not have a single "clear all" button, so you have to highlight and cut the text instead.
Follow these exact steps:
Go to the top of the file:
Press
+
(backslash).
Mac users: Use
instead of
.
Start highlighting:
Press
+...
|
Firefox
|
DXP4800PLUS-B5F8 — Personal
|
NULL
|
27966
|
|
27967
|
Screenpipe — Archive
Screenpipe — Archive
All docs Screenpipe — Archive
Screenpipe — Archive
All docs · AFFiNE
All docs · AFFiNE
DXP4800PLUS-B5F8
DXP4800PLUS-B5F8
New Tab
New Tab
Screenpipe — Archive
Screenpipe — Archive
SQLite Web: archive.db
SQLite Web: archive.db
SQLite Web: db.sqlite
SQLite Web: db.sqlite
Claude
Claude
Manage extra usage for paid Claude plans | Claude Help Center
Manage extra usage for paid Claude plans | Claude Help Center
New Tab
New Tab
2 TB in 25 MB/s - Google Search
2 TB in 25 MB/s - Google Search
New Tab
New Tab
Close tab
New Tab
Customize sidebar
Close Google Gemini (⌃X)
Open history (⇧⌘H)
Open bookmarks (⌘B)
Bitwarden
AI Chat settings
Close
Google Account: Lukáš Koválik ([EMAIL])
Main menu
New chat
Share conversation
Open menu for conversation actions.
Conversation with Gemini
Conversation with Gemini
Copy prompt
Edit
You said nano how to delete all. How to jump to line
You said
nano how to delete all. How to jump to line
Listen
Show thinking
Gemini said
Gemini said
Here is how to perform both of those actions in the
nano
text editor.
How to Delete All Text
How to Delete All Text
Nano does not have a single "clear all" button, so you have to highlight and cut the text instead.
Follow these exact steps:
Go to the top of the file:
Press
+
(backslash).
Mac users: Use
instead of
.
Start highlighting:
Press
+
(or
+
). You will see a "Mark Set" message at the bottom.
Go to the bottom of the file:
Press
+
(forward slash). This highlights everything.
Cut (delete) the text:
Press
+
.
How to Jump to a Specific Line
How to Jump to a Specific Line...
|
Firefox
|
DXP4800PLUS-B5F8 — Personal
|
NULL
|
27967
|
|
27968
|
Screenpipe — Archive
Screenpipe — Archive
All docs Screenpipe — Archive
Screenpipe — Archive
All docs · AFFiNE
All docs · AFFiNE
DXP4800PLUS-B5F8
DXP4800PLUS-B5F8
New Tab
New Tab
Screenpipe — Archive
Screenpipe — Archive
SQLite Web: archive.db
SQLite Web: archive.db
SQLite Web: db.sqlite
SQLite Web: db.sqlite
Claude
Claude
Manage extra usage for paid Claude plans | Claude Help Center
Manage extra usage for paid Claude plans | Claude Help Center
New Tab
New Tab
2 TB in 25 MB/s - Google Search
2 TB in 25 MB/s - Google Search
New Tab
New Tab
Close tab
New Tab
New Tab
Close tab
New Tab
Customize sidebar
Close Google Gemini (⌃X)
Open history (⇧⌘H)
Open bookmarks (⌘B)
Bitwarden
AI Chat settings
Close
Google Account: Lukáš Koválik ([EMAIL])
Main menu
New chat
Share conversation
Open menu for conversation actions.
Conversation with Gemini
Conversation with Gemini
Copy prompt
Edit
You said nano how to delete all. How to jump to line
You said
nano how to delete all. How to jump to line
Listen
Show thinking
Gemini said
Gemini said
Here is how to perform both of those actions in the
nano
text editor.
How to Delete All Text
How to Delete All Text
Nano does not have a single "clear all" button, so you have to highlight and cut the text instead.
Follow these exact steps:
Go to the top of the file:
Press
+
(backslash).
Mac users: Use
instead of
.
Start highlighting:
Press
+
(or
+
). You will see a "Mark Set" message at the bottom.
Go to the bottom of the file:
Press
+
(forward slash). This highlights everything.
Cut (delete) the text:
Press
+
.
How to Jump to a Specific Line
How to Jump to a Specific Line
To quickly navigate to a line number:
Open the "Go To Line" prompt:
Press
+
(Control and Underscore).
Enter the number:
Type the line number you want to jump to.
Confirm:
Press
.
(Alternative shortcut: Depending on your version of nano, pressing
Alt
+
G
will also bring up the line number prompt).
Good response
Bad response
Redo
Share and export
Copy
Show more options
Ask Gemini
Ask Gemini
Open upload file menu
Tools
Open mode picker
Pro
Microphone
Send message
Gemini is AI and can make mistakes, including about people.
Your privacy and Gemini Opens in a new window
Your privacy and Gemini
Opens in a new window
Summarize page
Summarize page
22°
C
New York City
Open menu
Mozilla Firefox
Search with Google or enter address
Search with Google or enter address
Inbox - [EMAIL] - Gmail
Inbox - [EMAIL] - Gmail
Open context menu for Inbox - [EMAIL] - Gmail
(172) YouTube
(172) YouTube
Open context menu for (172) YouTube
DXP4800PLUS-B5F8
DXP4800PLUS-B5F8
Open context menu for DXP4800PLUS-B5F8
SQLite Web: db.sqlite
SQLite Web: db.sqlite
Open context menu for SQLite Web: db.sqlite
Table: transaction_imports - db - Adminer
Table: transaction_imports - db - Adminer
Open context menu for Table: transaction_imports - db - Adminer
All docs · AFFiNE
All docs · AFFiNE
Open context menu for All docs · AFFiNE
GitHub - screenpipe/screenpipe: Run agents that work based on what you do. 24/7 local screen & mic recording for the superintelligence era · GitHub
GitHub - screenpipe/screenpipe: Run agents that work based on what you do. 24/7 local screen & mic recording for the superintelligence era · GitHub
Open context menu for GitHub - screenpipe/screenpipe: Run agents that work based on what you do. 24/7 local screen & mic recording for the superintelligence era · GitHub
authentik
authentik
Open context menu for authentik
Customize
Customize...
|
Firefox
|
Personal — Mozilla Firefox
|
NULL
|
27968
|
|
27969
|
Screenpipe — Archive
Screenpipe — Archive
All docs Screenpipe — Archive
Screenpipe — Archive
All docs · AFFiNE
All docs · AFFiNE
DXP4800PLUS-B5F8
DXP4800PLUS-B5F8
New Tab
New Tab
Screenpipe — Archive
Screenpipe — Archive
SQLite Web: archive.db
SQLite Web: archive.db
SQLite Web: db.sqlite
SQLite Web: db.sqlite
Claude
Claude
Manage extra usage for paid Claude plans | Claude Help Center
Manage extra usage for paid Claude plans | Claude Help Center
New Tab
New Tab
2 TB in 25 MB/s - Google Search
2 TB in 25 MB/s - Google Search
New Tab
New Tab
Close tab
New Tab
New Tab
Close tab
New Tab
Customize sidebar
Close Google Gemini (⌃X)
Open history (⇧⌘H)
Open bookmarks (⌘B)
Bitwarden
AI Chat settings
Close
Google Account: Lukáš Koválik ([EMAIL])
Main menu
New chat
Share conversation
Open menu for conversation actions.
Conversation with Gemini
Conversation with Gemini
Copy prompt
Edit
You said nano how to delete all. How to jump to line
You said
nano how to delete all. How to jump to line
Listen
Show thinking
Gemini said
Gemini said
Here is how to perform both of those actions in the
nano
text editor.
How to Delete All Text
How to Delete All Text
Nano does not have a single "clear all" button, so you have to highlight and cut the text instead.
Follow these exact steps:
Go to the top of the file:
Press
+
(backslash).
Mac users: Use
instead of
.
Start highlighting:
Press
+
(or
+
). You will see a "Mark Set" message at the bottom.
Go to the bottom of the file:
Press
+
(forward slash). This highlights everything.
Cut (delete) the text:
Press
+
.
How to Jump to a Specific Line
How to Jump to a Specific Line
To quickly navigate to a line number:
Open the "Go To Line" prompt:
Press
+
(Control and Underscore).
Enter the number:
Type the line number you want to jump to.
Confirm:
Press
.
(Alternative shortcut: Depending on your version of nano, pressing
Alt
+
G
will also bring up the line number prompt).
Good response
Bad response
Redo
Share and export
Copy
Show more options
Ask Gemini
Ask Gemini
Open upload file menu
Tools
Open mode picker
Pro
Microphone
Send message
Gemini is AI and can make mistakes, including about people.
Your privacy and Gemini Opens in a new window
Your privacy and Gemini
Opens in a new window
Summarize page
Summarize page
22°
C
New York City
Open menu
Mozilla Firefox
Search with Google or enter address
Search with Google or enter address
Inbox - [EMAIL] - Gmail
Inbox - [EMAIL] - Gmail
Open context menu for Inbox - [EMAIL] - Gmail
(172) YouTube
(172) YouTube
Open context menu for (172) YouTube
DXP4800PLUS-B5F8
DXP4800PLUS-B5F8
Open context menu for DXP4800PLUS-B5F8
SQLite Web: db.sqlite
SQLite Web: db.sqlite
Open context menu for SQLite Web: db.sqlite
Table: transaction_imports - db - Adminer
Table: transaction_imports - db - Adminer
Open context menu for Table: transaction_imports - db - Adminer
All docs · AFFiNE
All docs · AFFiNE
Open context menu for All docs · AFFiNE
GitHub - screenpipe/screenpipe: Run agents that work based on what you do. 24/7 local screen & mic recording for the superintelligence era · GitHub
GitHub - screenpipe/screenpipe: Run agents that work based on what you do. 24/7 local screen & mic recording for the superintelligence era · GitHub
Open context menu for GitHub - screenpipe/screenpipe: Run agents that work based on what you do. 24/7 local screen & mic recording for the superintelligence era · GitHub
authentik
authentik
Open context menu for authentik
Customize
Customize...
|
Firefox
|
Personal — Mozilla Firefox
|
NULL
|
27969
|
|
27970
|
Screenpipe — Archive
Screenpipe — Archive
All docs Screenpipe — Archive
Screenpipe — Archive
All docs · AFFiNE
All docs · AFFiNE
DXP4800PLUS-B5F8
DXP4800PLUS-B5F8
New Tab
New Tab
Screenpipe — Archive
Screenpipe — Archive
SQLite Web: archive.db
SQLite Web: archive.db
SQLite Web: db.sqlite
SQLite Web: db.sqlite
Claude
Claude
Manage extra usage for paid Claude plans | Claude Help Center
Manage extra usage for paid Claude plans | Claude Help Center
New Tab
New Tab
2 TB in 25 MB/s - Google Search
2 TB in 25 MB/s - Google Search
New Tab
New Tab
nano mac keyboard - Google Search
nano mac keyboard - Google Search
Close tab
New Tab
Customize sidebar
Close Google Gemini (⌃X)
Open history (⇧⌘H)
Open bookmarks (⌘B)
Bitwarden
AI Chat settings
Close
Google Account: Lukáš Koválik ([EMAIL])
Main menu
New chat
Share conversation
Open menu for conversation actions.
Conversation with Gemini
Conversation with Gemini
Copy prompt
Edit
You said nano how to delete all. How to jump to line
You said
nano how to delete all. How to jump to line
Listen
Show thinking
Gemini said
Gemini said
Here is how to perform both of those actions in the
nano
text editor.
How to Delete All Text
How to Delete All Text
Nano does not have a single "clear all" button, so you have to highlight and cut the text instead.
Follow these exact steps:
Go to the top of the file:
Press
+
(backslash).
Mac users: Use
instead of
.
Start highlighting:
Press
+
(or
+
). You will see a "Mark Set" message at the bottom.
Go to the bottom of the file:
Press
+
(forward slash). This highlights everything.
Cut (delete) the text:
Press
+
.
How to Jump to a Specific Line
How to Jump to a Specific Line
To quickly navigate to a line number:
Open the "Go To Line" prompt:
Press
+
(Control and Underscore).
Enter the number:
Type the line number you want to jump to.
Confirm:
Press
.
(Alternative shortcut: Depending on your version of nano, pressing
Alt
+
G
will also bring up the line number prompt).
Good response
Bad response
Redo
Share and export
Copy
Show more options
Ask Gemini
Ask Gemini
Open upload file menu
Tools
Open mode picker
Pro
Microphone
Send message
Gemini is AI and can make mistakes, including about people.
Your privacy and Gemini Opens in a new window
Your privacy and Gemini
Opens in a new window
Summarize page
Summarize page
Skip to main content
Skip to main content
Accessibility help
Accessibility help
Accessibility feedback
Accessibility feedback
Go to Google Home
nano mac keyboard
nano mac keyboard
Clear
Search by voice
Search by image
Search
Google apps
Google Account: Lukáš Koválik ([EMAIL])
AI Mode
AI Mode
All
All
Images
Images
Videos
Videos
Short videos
Short videos
News
News
Forums
Forums
More filters
More
Tools
Tools
Search Results
Search Results
Web results
Web results
nano keyboard shortcuts Gist https://gist.github.com › franz-josef-kaiser
nano keyboard shortcuts
nano keyboard shortcuts
Gist
https://gist.github.com
› franz-josef-kaiser
About this result
^
= Ctrl key M = Alt key ^G (F1
) Display this help text ^X (F2) Close the current file buffer / Exit from nano ^O (F3) Write the current file to disk
How to copy and paste selected text in nano on a Mac? Super User https://superuser.com › questions › how-to-copy-and-p...
How to copy and paste selected text in nano on a Mac?
How to copy and paste selected text in nano on a Mac?
Super User
https://superuser.com
› questions › how-to-copy-and-p...
About this result
May 24, 2015
—
I’m using nano in iTerm2, I can mark the text using ctrl+^ but I'm not able to copy and paste the text. I know that ctrl+k can be used cut the entire ...
5 answers
5 answers
·
Top answer:
Set the mark to start highlighting the text : Ctrl+6 or Ctrl+Shift+6 Copy the highlighted ...
How to toggle line number display in nano on a Mac?
How to toggle line number display in
nano
on a
Mac
?
2 answers
Apr 10, 2022
How do I select all text from a file with nano ...
How do I select all text from a file with
nano
...
14 answers
Oct 6, 2010
More results from superuser.com
More results from superuser.com
Nano commands for mac and other DEV Community https://dev.to › akash32755 › nano-commands-for-mac...
Nano commands for mac and other
Nano commands for mac and other
DEV Community
https://dev.to
› akash32755 › nano-commands-for-mac...
About this result
Mar 1, 2024
—
Ctrl + G : Display Nano's help menu
. · Ctrl + C : Display current line and column number. · Ctrl + R : Read another file into the current one.
nano editor on OS X - How to type M-U for undo? Stack Overflow 3 answers · 10 years ago
nano editor on OS X - How to type M-U for undo?
nano editor on OS X - How to type M-U for undo?
Stack Overflow
3 answers · 10 years ago
About this result
I am using nano 2.5.3 on OS X Yosemite, and I see commands at the bottom such as: CopyM-U Undo M-E Redo So far, I have not been able to figure out which ...
3 answers
3 answers
·
Top answer:
Meta (M) symbol is the Esc key in OSX. To undo a change in nano, press ESC and then U (i.e. ...
nano - Unix: what modifier key does "M-" refer to (e ...
nano
- Unix: what modifier key does "M-" refer to (e ...
3 answers
Oct 9, 2014
Keyboard shortcut to "Comment" a line in NANO?
Keyboard
shortcut to "Comment" a line in
NANO
?
3 answers
Aug 24, 2011
More results from stackoverflow.com
More results from stackoverflow.com
How to jump between words in nano using the option key? Reddit · r/MacOS 10+ comments · 2 years ago
How to jump between words in nano using the option key?
How to jump between words in nano using the option key?
Reddit · r/MacOS
10+ comments · 2 years ago
About this result
Hi, My MacBook has a german keyboard. How can I jump between words in the nano text editor using option + arrow left/right? It works everywhere else ...
15 answers
15 answers
·
Top answer:
I’m not using nano myself, but you can bind whatever key combination you like to ...
Does anybody else have this keyboard imprint on ...
Does anybody else have this
keyboard
imprint on ...
52 answers
Feb 19, 2026
How to use keyboard commands in Nano (^X, ^K, etc ...
How to use
keyboard
commands in
Nano
(^X, ^K, etc ...
5 answers
Sep 6, 2019
More results from www.reddit.com
More results from www.reddit.com
Overview of nano's shortcuts Text editor Nano https://www.nano-editor.org › dist › latest › cheatsheet
Overview of nano's shortcuts
Overview of nano's shortcuts
Text editor Nano
https://www.nano-editor.org
› dist › latest › cheatsheet
About this result
The editor's keystrokes and their functions ;
Ctrl+S · Save current file
; Ctrl+O · Offer to write file ("Save as") ; Ctrl+R · Insert a file into current one ; Ctrl+X ...
nano - UPPMAX Documentation UPPMAX Documentation https://docs.uppmax.uu.se › software › nano
nano - UPPMAX Documentation
nano - UPPMAX Documentation
UPPMAX Documentation
https://docs.uppmax.uu.se
› software › nano
About this result
The
keyboard
shortcuts are shown on-screen, where ^ denotes Ctrl and M the meta key. OS specifics: On Windows, Alt is the meta key; On
Mac
: in the Terminal.
Use command-line text editors in Terminal on Mac Apple Support https://support.apple.com › en-sa › guide › mac
Use command-line text editors in Terminal on Mac
Use command-line text editors in Terminal on Mac
Apple Support
https://support.apple.com
› en-sa › guide › mac
About this result
Nano nano is a simple command-line editor
. It's a good introduction to using a command-line editor because it includes easy-to-follow on-screen help. See ...
Nano Terminal mac | Learn Basic Nano text editor keyboard ... YouTube · CoinNerd 2.4K+ views · 5 years ago
Nano Terminal mac | Learn Basic Nano text editor keyboard ...
Nano Terminal mac | Learn Basic Nano text editor keyboard ...
YouTube · CoinNerd
2.4K+ views · 5 years ago
About this result
Nano Terminal mac | Learn Basic Nano text editor keyboard ... by CoinNerd on YouTube. Play on Google. 7:43
Learn everything or not everything but the most common uh short keyboard shortcuts you need to know to use the nano text editor.
3 key moments in this video
3 key moments in this video
nano Keyboard Shortcuts KeyCombiner https://keycombiner.com › collections › nano
nano Keyboard Shortcuts
nano Keyboard Shortcuts
KeyCombiner
https://keycombiner.com
› collections › nano
About this result
nano logo nano Key Combinations
; Start a replacing session, alt + r ; Deletion ; Delete character before cursor, ctrl + h ; Delete character under cursor, ctrl + d.
People also search for
People also search for
What is M-6 in nano Mac
What is M-6 in
nano Mac
Nano shortcuts Mac
Nano
shortcuts
Mac
Nano mac keyboard command line
Nano mac keyboard
command line
Nano mac keyboard commands
Nano mac keyboard
commands
Nano mac keyboard not working
Nano mac keyboard
not working
How to copy text in nano Mac
How to copy text in
nano Mac
How to undo in nano mac
How to undo in
nano mac
How to copy in nano
How to copy in
nano
Page navigation
Page navigation
1
Page 2
2
Page 3
3
Page 4
4
Page 5
5
Page 6
6
Page 7
7
Page 8
8
Page 9
9
Page 10
10
Next
Next
Next
Footer links
Footer links
Results are personalised
-
Try without personalisation
Try without personalisation
Bulgaria
Manastirski Livadi, Sofia - Based on your places (Home)
Manastirski Livadi, Sofia
-
Based on your places (Home)
-
Update location
Help
Help
Send feedback
Send feedback
Privacy
Privacy
Terms
Terms...
|
Firefox
|
nano mac keyboard - Google Search — Personal
|
NULL
|
27970
|
|
27971
|
Screenpipe — Archive
Screenpipe — Archive
All docs Screenpipe — Archive
Screenpipe — Archive
All docs · AFFiNE
All docs · AFFiNE
DXP4800PLUS-B5F8
DXP4800PLUS-B5F8
New Tab
New Tab
Screenpipe — Archive
Screenpipe — Archive
SQLite Web: archive.db
SQLite Web: archive.db
SQLite Web: db.sqlite
SQLite Web: db.sqlite
Claude
Claude
Manage extra usage for paid Claude plans | Claude Help Center
Manage extra usage for paid Claude plans | Claude Help Center
New Tab
New Tab
2 TB in 25 MB/s - Google Search
2 TB in 25 MB/s - Google Search
New Tab
New Tab
nano mac keyboard - Google Search
nano mac keyboard - Google Search
Close tab
New Tab
Customize sidebar
Close Google Gemini (⌃X)
Open history (⇧⌘H)
Open bookmarks (⌘B)
Bitwarden
AI Chat settings
Close
Google Account: Lukáš Koválik ([EMAIL])
Main menu
New chat
Share conversation
Open menu for conversation actions.
Conversation with Gemini
Conversation with Gemini
Copy prompt
Edit
You said nano how to delete all. How to jump to line
You said
nano how to delete all. How to jump to line
Listen
Show thinking
Gemini said
Gemini said
Here is how to perform both of those actions in the
nano
text editor.
How to Delete All Text
How to Delete All Text
Nano does not have a single "clear all" button, so you have to highlight and cut the text instead.
Follow these exact steps:
Go to the top of the file:
Press
+
(backslash).
Mac users: Use
instead of
.
Start highlighting:
Press
+
(or
+
). You will see a "Mark Set" message at the bottom.
Go to the bottom of the file:
Press
+
(forward slash). This highlights everything.
Cut (delete) the text:
Press
+
.
How to Jump to a Specific Line
How to Jump to a Specific Line
To quickly navigate to a line number:
Open the "Go To Line" prompt:
Press
+
(Control and Underscore).
Enter the number:
Type the line number you want to jump to.
Confirm:
Press
.
(Alternative shortcut: Depending on your version of nano, pressing
Alt
+
G
will also bring up the line number prompt).
Good response
Bad response
Redo
Share and export
Copy
Show more options
Ask Gemini
Ask Gemini
Open upload file menu
Tools
Open mode picker
Pro
Microphone
Send message
Gemini is AI and can make mistakes, including about people.
Your privacy and Gemini Opens in a new window
Your privacy and Gemini
Opens in a new window
Summarize page
Summarize page
Skip to main content
Skip to main content
Accessibility help
Accessibility help
Accessibility feedback
Accessibility feedback
Go to Google Home
nano mac keyboard
nano mac keyboard
Clear
Search by voice
Search by image
Search
Google apps
Google Account: Lukáš Koválik ([EMAIL])
AI Mode
AI Mode
All
All
Images
Images
Videos
Videos
Short videos
Short videos
News
News
Forums
Forums
More filters
More
Tools
Tools
Search Results
Search Results
Web results
Web results
nano keyboard shortcuts Gist https://gist.github.com › franz-josef-kaiser
nano keyboard shortcuts
nano keyboard shortcuts
Gist
https://gist.github.com
› franz-josef-kaiser
About this result
^
= Ctrl key M = Alt key ^G (F1
) Display this help text ^X (F2) Close the current file buffer / Exit from nano ^O (F3) Write the current file to disk
How to copy and paste selected text in nano on a Mac? Super User https://superuser.com › questions › how-to-copy-and-p...
How to copy and paste selected text in nano on a Mac?
How to copy and paste selected text in nano on a Mac?
Super User
https://superuser.com
› questions › how-to-copy-and-p...
About this result
May 24, 2015
—
I’m using nano in iTerm2, I can mark the text using ctrl+^ but I'm not able to copy and paste the text. I know that ctrl+k can be used cut the entire ...
5 answers
5 answers
·
Top answer:
Set the mark to start highlighting the text : Ctrl+6 or Ctrl+Shift+6 Copy the highlighted ...
How to toggle line number display in nano on a Mac?
How to toggle line number display in
nano
on a
Mac
?
2 answers
Apr 10, 2022
How do I select all text from a file with nano ...
How do I select all text from a file with
nano
...
14 answers
Oct 6, 2010
More results from superuser.com
More results from superuser.com
Nano commands for mac and other DEV Community https://dev.to › akash32755 › nano-commands-for-mac...
Nano commands for mac and other
Nano commands for mac and other
DEV Community
https://dev.to
› akash32755 › nano-commands-for-mac...
About this result
Mar 1, 2024
—
Ctrl + G : Display Nano's help menu
. · Ctrl + C : Display current line and column number. · Ctrl + R : Read another file into the current one.
nano editor on OS X - How to type M-U for undo? Stack Overflow 3 answers · 10 years ago
nano editor on OS X - How to type M-U for undo?
nano editor on OS X - How to type M-U for undo?
Stack Overflow
3 answers · 10 years ago
About this result
I am using nano 2.5.3 on OS X Yosemite, and I see commands at the bottom such as: CopyM-U Undo M-E Redo So far, I have not been able to figure out which ...
3 answers
3 answers
·
Top answer:
Meta (M) symbol is the Esc key in OSX. To undo a change in nano, press ESC and then U (i.e. ...
nano - Unix: what modifier key does "M-" refer to (e ...
nano
- Unix: what modifier key does "M-" refer to (e ...
3 answers
Oct 9, 2014
Keyboard shortcut to "Comment" a line in NANO?
Keyboard
shortcut to "Comment" a line in
NANO
?
3 answers
Aug 24, 2011
More results from stackoverflow.com
More results from stackoverflow.com
How to jump between words in nano using the option key? Reddit · r/MacOS 10+ comments · 2 years ago
How to jump between words in nano using the option key?
How to jump between words in nano using the option key?
Reddit · r/MacOS
10+ comments · 2 years ago
About this result
Hi, My MacBook has a german keyboard. How can I jump between words in the nano text editor using option + arrow left/right? It works everywhere else ...
15 answers
15 answers
·
Top answer:
I’m not using nano myself, but you can bind whatever key combination you like to ...
Does anybody else have this keyboard imprint on ...
Does anybody else have this
keyboard
imprint on ...
52 answers
Feb 19, 2026
How to use keyboard commands in Nano (^X, ^K, etc ...
How to use
keyboard
commands in
Nano
(^X, ^K, etc ...
5 answers
Sep 6, 2019
More results from www.reddit.com
More results from www.reddit.com...
|
Firefox
|
nano mac keyboard - Google Search — Personal
|
NULL
|
27971
|
|
27972
|
Screenpipe — Archive
Screenpipe — Archive
All docs Screenpipe — Archive
Screenpipe — Archive
All docs · AFFiNE
All docs · AFFiNE
DXP4800PLUS-B5F8
DXP4800PLUS-B5F8
New Tab
New Tab
Screenpipe — Archive
Screenpipe — Archive
SQLite Web: archive.db
SQLite Web: archive.db
SQLite Web: db.sqlite
SQLite Web: db.sqlite
Claude
Claude
Manage extra usage for paid Claude plans | Claude Help Center
Manage extra usage for paid Claude plans | Claude Help Center
New Tab
New Tab
2 TB in 25 MB/s - Google Search
2 TB in 25 MB/s - Google Search
New Tab
New Tab
nano mac keyboard - Google Search
nano mac keyboard - Google Search
Close tab
New Tab
Customize sidebar
Close Google Gemini (⌃X)
Open history (⇧⌘H)
Open bookmarks (⌘B)
Bitwarden
AI Chat settings
Close
Google Account: Lukáš Koválik ([EMAIL])
Main menu
New chat
Share conversation
Open menu for conversation actions.
Conversation with Gemini
Conversation with Gemini
Copy prompt
Edit
You said nano how to delete all. How to jump to line
You said
nano how to delete all. How to jump to line
Listen
Show thinking
Gemini said
Gemini said
Here is how to perform both of those actions in the
nano
text editor.
How to Delete All Text
How to Delete All Text
Nano does not have a single "clear all" button, so you have to highlight and cut the text instead.
Follow these exact steps:
Go to the top of the file:
Press
+
(backslash).
Mac users: Use
instead of
.
Start highlighting:
Press
+
(or
+
). You will see a "Mark Set" message at the bottom.
Go to the bottom of the file:
Press
+
(forward slash). This highlights everything.
Cut (delete) the text:
Press
+
.
How to Jump to a Specific Line
How to Jump to a Specific Line
To quickly navigate to a line number:
Open the "Go To Line" prompt:
Press
+
(Control and Underscore).
Enter the number:
Type the line number you want to jump to.
Confirm:
Press
.
(Alternative shortcut: Depending on your version of nano, pressing
Alt
+
G
will also bring up the line number prompt).
Good response
Bad response
Redo
Share and export
Copy
Show more options
Ask Gemini
Ask Gemini
Open upload file menu
Tools
Open mode picker
Pro
Microphone
Send message
Gemini is AI and can make mistakes, including about people.
Your privacy and Gemini Opens in a new window
Your privacy and Gemini
Opens in a new window
Summarize page
Summarize page
Skip to main content
Skip to main content
Accessibility help
Accessibility help
Accessibility feedback
Accessibility feedback
Go to Google Home
nano mac keyboard
nano mac keyboard
Clear
Search by voice
Search by image
Search
Google apps
Google Account: Lukáš Koválik ([EMAIL])
AI Mode
AI Mode
All
All
Images
Images
Videos
Videos
Short videos
Short videos
News
News
Forums
Forums
More filters
More
Tools
Tools
Search Results
Search Results
Web results
Web results
nano keyboard shortcuts Gist https://gist.github.com › franz-josef-kaiser
nano keyboard shortcuts
nano keyboard shortcuts
Gist
https://gist.github.com
› franz-josef-kaiser
About this result
^
= Ctrl key M = Alt key ^G (F1
) Display this help text ^X (F2) Close the current file buffer / Exit from nano ^O (F3) Write the current file to disk
How to copy and paste selected text in nano on a Mac? Super User https://superuser.com › questions › how-to-copy-and-p...
How to copy and paste selected text in nano on a Mac?
How to copy and paste selected text in nano on a Mac?
Super User
https://superuser.com
› questions › how-to-copy-and-p...
About this result
May 24, 2015
—
I’m using nano in iTerm2, I can mark the text using ctrl+^ but I'm not able to copy and paste the text. I know that ctrl+k can be used cut the entire ...
5 answers
5 answers
·
Top answer:
Set the mark to start highlighting the text : Ctrl+6 or Ctrl+Shift+6 Copy the highlighted ...
How to toggle line number display in nano on a Mac?
How to toggle line number display in
nano
on a
Mac
?
2 answers
Apr 10, 2022
How do I select all text from a file with nano ...
How do I select all text from a file with
nano
...
14 answers
Oct 6, 2010
More results from superuser.com
More results from superuser.com
Nano commands for mac and other DEV Community https://dev.to › akash32755 › nano-commands-for-mac...
Nano commands for mac and other
Nano commands for mac and other
DEV Community
https://dev.to
› akash32755 › nano-commands-for-mac...
About this result
Mar 1, 2024
—
Ctrl + G : Display Nano's help menu
. · Ctrl + C : Display current line and column number. · Ctrl + R : Read another file into the current one.
nano editor on OS X - How to type M-U for undo? Stack Overflow 3 answers · 10 years ago
nano editor on OS X - How to type M-U for undo?
nano editor on OS X - How to type M-U for undo?
Stack Overflow
3 answers · 10 years ago
About this result
I am using nano 2.5.3 on OS X Yosemite, and I see commands at the bottom such as: CopyM-U Undo M-E Redo So far, I have not been able to figure out which ...
3 answers
3 answers
·
Top answer:
Meta (M) symbol is the Esc key in OSX. To undo a change in nano, press ESC and then U (i.e. ...
nano - Unix: what modifier key does "M-" refer to (e ...
nano
- Unix: what modifier key does "M-" refer to (e ...
3 answers
Oct 9, 2014
Keyboard shortcut to "Comment" a line in NANO?
Keyboard
shortcut to "Comment" a line in
NANO
?
3 answers
Aug 24, 2011
More results from stackoverflow.com
More results from stackoverflow.com
How to jump between words in nano using the option key? Reddit · r/MacOS 10+ comments · 2 years ago
How to jump between words in nano using the option key?
How to jump between words in nano using the option key?
Reddit · r/MacOS
10+ comments · 2 years ago
About this result
Hi, My MacBook has a german keyboard. How can I jump between words in the nano text editor using option + arrow left/right? It works everywhere else ...
15 answers
15 answers
·
Top answer:
I’m not using nano myself, but you can bind whatever key combination you like to ...
Does anybody else have this keyboard imprint on ...
Does anybody else have this
keyboard
imprint on ...
52 answers
Feb 19, 2026
How to use keyboard commands in Nano (^X, ^K, etc ...
How to use
keyboard
commands in
Nano
(^X, ^K, etc ...
5 answers
Sep 6, 2019
More results from www.reddit.com
More results from www.reddit.com
Overview of nano's shortcuts Text editor Nano https://www.nano-editor.org › dist › latest › cheatsheet
Overview of nano's shortcuts
Overview of nano's shortcuts
Text editor Nano
https://www.nano-editor.org
› dist › latest › cheatsheet
About this result
The editor's keystrokes and their functions ;
Ctrl+S · Save current file
; Ctrl+O · Offer to write file ("Save as") ; Ctrl+R · Insert a file into current one ; Ctrl+X ...
nano - UPPMAX Documentation UPPMAX Documentation https://docs.uppmax.uu.se › software › nano
nano - UPPMAX Documentation
nano - UPPMAX Documentation
UPPMAX Documentation
https://docs.uppmax.uu.se
› software › nano
About this result
The
keyboard
shortcuts are shown on-screen, where ^ denotes Ctrl and M the meta key. OS specifics: On Windows, Alt is the meta key; On
Mac
: in the Terminal.
Use command-line text editors in Terminal on Mac Apple Support https://support.apple.com › en-sa › guide › mac
Use command-line text editors in Terminal on Mac...
|
Firefox
|
nano mac keyboard - Google Search — Personal
|
NULL
|
27972
|
|
27974
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
#!/bin/bash
# screenpipe_sync.sh
# Syncs Screenpipe SQLite data (vision + audio) to a NAS archive database.
# Append-only, no deletions.
#
# Key design points
# -----------------
# 1. Multi-install safe via install_id.
# Source IDs reset to 1 on every screenpipe reinstall. To avoid collisions
# in the NAS archive, every synced table gets an extra `install_id` column,
# and the logical primary key becomes (install_id, id) enforced by a
# unique index. The install_id is a UUID stored in
# ~/.screenpipe/.sync_install_id — wiping ~/.screenpipe/ (which is what
# happens on reinstall) discards it, so the next run generates a new one.
#
# 2. Schema-drift tolerant. If screenpipe migrations add new columns to the
# source DB, the NAS gets ALTER TABLE'd to match. Inserts use explicit
# column lists so positional mismatches can't occur.
#
# 3. FTS caveat. FTS tables in the NAS use source `id` as rowid. After a
# reinstall, INSERT OR IGNORE will silently skip rows whose id collides
# with a previous install's id, so FTS only reliably indexes the most
# recent install. Falls back to LIKE queries on the base tables for
# multi-install searches (which can filter by install_id).
#
# Usage
# -----
# ./screenpipe_sync.sh # syncs yesterday
# ./screenpipe_sync.sh 2026-04-15 # syncs a specific date
# ./screenpipe_sync.sh today # syncs today so far
# ./screenpipe_sync.sh --reset-install-id # rotate install_id and exit
# ./screenpipe_sync.sh --show-install-id # print install_id and exit
set -euo pipefail
# ─── CONFIG ───────────────────────────────────────────────────────────────────
DB_SRC="${SCREENPIPE_DB:-$HOME/.screenpipe/db.sqlite}"
NAS_MOUNT="${NAS_MOUNT:-/Volumes/screenpipe}"
NAS_DB="$NAS_MOUNT/archive.db"
NAS_DATA="$NAS_MOUNT/data"
[ Exit cancelled ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27974
|
|
27975
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
#!/bin/bash
# screenpipe_sync.sh
# Syncs Screenpipe SQLite data (vision + audio) to a NAS archive database.
# Append-only, no deletions.
#
# Key design points
# -----------------
# 1. Multi-install safe via install_id.
# Source IDs reset to 1 on every screenpipe reinstall. To avoid collisions
# in the NAS archive, every synced table gets an extra `install_id` column,
# and the logical primary key becomes (install_id, id) enforced by a
# unique index. The install_id is a UUID stored in
# ~/.screenpipe/.sync_install_id — wiping ~/.screenpipe/ (which is what
# happens on reinstall) discards it, so the next run generates a new one.
#
# 2. Schema-drift tolerant. If screenpipe migrations add new columns to the
# source DB, the NAS gets ALTER TABLE'd to match. Inserts use explicit
# column lists so positional mismatches can't occur.
#
# 3. FTS caveat. FTS tables in the NAS use source `id` as rowid. After a
# reinstall, INSERT OR IGNORE will silently skip rows whose id collides
# with a previous install's id, so FTS only reliably indexes the most
# recent install. Falls back to LIKE queries on the base tables for
# multi-install searches (which can filter by install_id).
#
# Usage
# -----
# ./screenpipe_sync.sh # syncs yesterday
# ./screenpipe_sync.sh 2026-04-15 # syncs a specific date
# ./screenpipe_sync.sh today # syncs today so far
# ./screenpipe_sync.sh --reset-install-id # rotate install_id and exit
# ./screenpipe_sync.sh --show-install-id # print install_id and exit
set -euo pipefail
# ─── CONFIG ───────────────────────────────────────────────────────────────────
DB_SRC="${SCREENPIPE_DB:-$HOME/.screenpipe/db.sqlite}"
NAS_MOUNT="${NAS_MOUNT:-/Volumes/screenpipe}"
NAS_DB="$NAS_MOUNT/archive.db"
NAS_DATA="$NAS_MOUNT/data"
[ Exit cancelled ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27975
|
|
27976
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
#!/bin/bash
# screenpipe_sync.sh
# Syncs Screenpipe SQLite data (vision + audio) to a NAS archive database.
# Append-only, no deletions.
#
# Key design points
# -----------------
# 1. Multi-install safe via install_id.
# Source IDs reset to 1 on every screenpipe reinstall. To avoid collisions
# in the NAS archive, every synced table gets an extra `install_id` column,
# and the logical primary key becomes (install_id, id) enforced by a
# unique index. The install_id is a UUID stored in
# ~/.screenpipe/.sync_install_id — wiping ~/.screenpipe/ (which is what
# happens on reinstall) discards it, so the next run generates a new one.
#
# 2. Schema-drift tolerant. If screenpipe migrations add new columns to the
# source DB, the NAS gets ALTER TABLE'd to match. Inserts use explicit
# column lists so positional mismatches can't occur.
#
# 3. FTS caveat. FTS tables in the NAS use source `id` as rowid. After a
# reinstall, INSERT OR IGNORE will silently skip rows whose id collides
# with a previous install's id, so FTS only reliably indexes the most
# recent install. Falls back to LIKE queries on the base tables for
# multi-install searches (which can filter by install_id).
#
# Usage
# -----
# ./screenpipe_sync.sh # syncs yesterday
# ./screenpipe_sync.sh 2026-04-15 # syncs a specific date
# ./screenpipe_sync.sh today # syncs today so far
# ./screenpipe_sync.sh --reset-install-id # rotate install_id and exit
# ./screenpipe_sync.sh --show-install-id # print install_id and exit
set -euo pipefail
# ─── CONFIG ───────────────────────────────────────────────────────────────────
DB_SRC="${SCREENPIPE_DB:-$HOME/.screenpipe/db.sqlite}"
NAS_MOUNT="${NAS_MOUNT:-/Volumes/screenpipe}"
NAS_DB="$NAS_MOUNT/archive.db"
NAS_DATA="$NAS_MOUNT/data"
[ Unknown Command: ^_ ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27976
|
|
27977
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
#!/bin/bash
# screenpipe_sync.sh
# Syncs Screenpipe SQLite data (vision + audio) to a NAS archive database.
# Append-only, no deletions.
#
# Key design points
# -----------------
# 1. Multi-install safe via install_id.
# Source IDs reset to 1 on every screenpipe reinstall. To avoid collisions
# in the NAS archive, every synced table gets an extra `install_id` column,
# and the logical primary key becomes (install_id, id) enforced by a
# unique index. The install_id is a UUID stored in
# ~/.screenpipe/.sync_install_id — wiping ~/.screenpipe/ (which is what
# happens on reinstall) discards it, so the next run generates a new one.
#
# 2. Schema-drift tolerant. If screenpipe migrations add new columns to the
# source DB, the NAS gets ALTER TABLE'd to match. Inserts use explicit
# column lists so positional mismatches can't occur.
#
# 3. FTS caveat. FTS tables in the NAS use source `id` as rowid. After a
# reinstall, INSERT OR IGNORE will silently skip rows whose id collides
# with a previous install's id, so FTS only reliably indexes the most
# recent install. Falls back to LIKE queries on the base tables for
# multi-install searches (which can filter by install_id).
#
# Usage
# -----
# ./screenpipe_sync.sh # syncs yesterday
# ./screenpipe_sync.sh 2026-04-15 # syncs a specific date
# ./screenpipe_sync.sh today # syncs today so far
# ./screenpipe_sync.sh --reset-install-id # rotate install_id and exit
# ./screenpipe_sync.sh --show-install-id # print install_id and exit
set -euo pipefail
# ─── CONFIG ───────────────────────────────────────────────────────────────────
DB_SRC="${SCREENPIPE_DB:-$HOME/.screenpipe/db.sqlite}"
NAS_MOUNT="${NAS_MOUNT:-/Volumes/screenpipe}"
NAS_DB="$NAS_MOUNT/archive.db"
NAS_DATA="$NAS_MOUNT/data"
[ Unknown Command: ^_ ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27977
|
|
27987
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
#!/bin/bash
# screenpipe_sync.sh
# Syncs Screenpipe SQLite data (vision + audio) to a NAS archive database.
# Append-only, no deletions.
#
# Key design points
# -----------------
# 1. Multi-install safe via install_id.
# Source IDs reset to 1 on every screenpipe reinstall. To avoid collisions
# in the NAS archive, every synced table gets an extra `install_id` column,
# and the logical primary key becomes (install_id, id) enforced by a
# unique index. The install_id is a UUID stored in
# ~/.screenpipe/.sync_install_id — wiping ~/.screenpipe/ (which is what
# happens on reinstall) discards it, so the next run generates a new one.
#
# 2. Schema-drift tolerant. If screenpipe migrations add new columns to the
# source DB, the NAS gets ALTER TABLE'd to match. Inserts use explicit
# column lists so positional mismatches can't occur.
#
# 3. FTS caveat. FTS tables in the NAS use source `id` as rowid. After a
# reinstall, INSERT OR IGNORE will silently skip rows whose id collides
# with a previous install's id, so FTS only reliably indexes the most
# recent install. Falls back to LIKE queries on the base tables for
# multi-install searches (which can filter by install_id).
#
# Usage
# -----
# ./screenpipe_sync.sh # syncs yesterday
# ./screenpipe_sync.sh 2026-04-15 # syncs a specific date
# ./screenpipe_sync.sh today # syncs today so far
# ./screenpipe_sync.sh --reset-install-id # rotate install_id and exit
# ./screenpipe_sync.sh --show-install-id # print install_id and exit
set -euo pipefail
# ─── CONFIG ───────────────────────────────────────────────────────────────────
DB_SRC="${SCREENPIPE_DB:-$HOME/.screenpipe/db.sqlite}"
NAS_MOUNT="${NAS_MOUNT:-/Volumes/screenpipe}"
NAS_DB="$NAS_MOUNT/archive.db"
NAS_DATA="$NAS_MOUNT/data"
[ Unknown Command: ^_ ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27987
|
|
27988
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
#!/bin/bash
# screenpipe_sync.sh
# Syncs Screenpipe SQLite data (vision + audio) to a NAS archive database.
# Append-only, no deletions.
#
# Key design points
# -----------------
# 1. Multi-install safe via install_id.
# Source IDs reset to 1 on every screenpipe reinstall. To avoid collisions
# in the NAS archive, every synced table gets an extra `install_id` column,
# and the logical primary key becomes (install_id, id) enforced by a
# unique index. The install_id is a UUID stored in
# ~/.screenpipe/.sync_install_id — wiping ~/.screenpipe/ (which is what
# happens on reinstall) discards it, so the next run generates a new one.
#
# 2. Schema-drift tolerant. If screenpipe migrations add new columns to the
# source DB, the NAS gets ALTER TABLE'd to match. Inserts use explicit
# column lists so positional mismatches can't occur.
#
# 3. FTS caveat. FTS tables in the NAS use source `id` as rowid. After a
# reinstall, INSERT OR IGNORE will silently skip rows whose id collides
# with a previous install's id, so FTS only reliably indexes the most
# recent install. Falls back to LIKE queries on the base tables for
# multi-install searches (which can filter by install_id).
#
# Usage
# -----
# ./screenpipe_sync.sh # syncs yesterday
# ./screenpipe_sync.sh 2026-04-15 # syncs a specific date
# ./screenpipe_sync.sh today # syncs today so far
# ./screenpipe_sync.sh --reset-install-id # rotate install_id and exit
# ./screenpipe_sync.sh --show-install-id # print install_id and exit
set -euo pipefail
# ─── CONFIG ───────────────────────────────────────────────────────────────────
DB_SRC="${SCREENPIPE_DB:-$HOME/.screenpipe/db.sqlite}"
NAS_MOUNT="${NAS_MOUNT:-/Volumes/screenpipe}"
NAS_DB="$NAS_MOUNT/archive.db"
NAS_DATA="$NAS_MOUNT/data"
[ Unknown Command: ^_ ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27988
|
|
27989
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
#!/bin/bash
# screenpipe_sync.sh
# Syncs Screenpipe SQLite data (vision + audio) to a NAS archive database.
# Append-only, no deletions.
#
# Key design points
# -----------------
# 1. Multi-install safe via install_id.
# Source IDs reset to 1 on every screenpipe reinstall. To avoid collisions
# in the NAS archive, every synced table gets an extra `install_id` column,
# and the logical primary key becomes (install_id, id) enforced by a
# unique index. The install_id is a UUID stored in
# ~/.screenpipe/.sync_install_id — wiping ~/.screenpipe/ (which is what
# happens on reinstall) discards it, so the next run generates a new one.
#
# 2. Schema-drift tolerant. If screenpipe migrations add new columns to the
# source DB, the NAS gets ALTER TABLE'd to match. Inserts use explicit
# column lists so positional mismatches can't occur.
#
# 3. FTS caveat. FTS tables in the NAS use source `id` as rowid. After a
# reinstall, INSERT OR IGNORE will silently skip rows whose id collides
# with a previous install's id, so FTS only reliably indexes the most
# recent install. Falls back to LIKE queries on the base tables for
# multi-install searches (which can filter by install_id).
#
# Usage
# -----
# ./screenpipe_sync.sh # syncs yesterday
# ./screenpipe_sync.sh 2026-04-15 # syncs a specific date
# ./screenpipe_sync.sh today # syncs today so far
# ./screenpipe_sync.sh --reset-install-id # rotate install_id and exit
# ./screenpipe_sync.sh --show-install-id # print install_id and exit
set -euo pipefail
# ─── CONFIG ───────────────────────────────────────────────────────────────────
DB_SRC="${SCREENPIPE_DB:-$HOME/.screenpipe/db.sqlite}"
NAS_MOUNT="${NAS_MOUNT:-/Volumes/screenpipe}"
NAS_DB="$NAS_MOUNT/archive.db"
NAS_DATA="$NAS_MOUNT/data"
[ Unknown Command: ^_ ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27989
|
|
27990
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
#!/bin/bash
# screenpipe_sync.sh
# Syncs Screenpipe SQLite data (vision + audio) to a NAS archive database.
# Append-only, no deletions.
#
# Key design points
# -----------------
# 1. Multi-install safe via install_id.
# Source IDs reset to 1 on every screenpipe reinstall. To avoid collisions
# in the NAS archive, every synced table gets an extra `install_id` column,
# and the logical primary key becomes (install_id, id) enforced by a
# unique index. The install_id is a UUID stored in
# ~/.screenpipe/.sync_install_id — wiping ~/.screenpipe/ (which is what
# happens on reinstall) discards it, so the next run generates a new one.
#
# 2. Schema-drift tolerant. If screenpipe migrations add new columns to the
# source DB, the NAS gets ALTER TABLE'd to match. Inserts use explicit
# column lists so positional mismatches can't occur.
#
# 3. FTS caveat. FTS tables in the NAS use source `id` as rowid. After a
# reinstall, INSERT OR IGNORE will silently skip rows whose id collides
# with a previous install's id, so FTS only reliably indexes the most
# recent install. Falls back to LIKE queries on the base tables for
# multi-install searches (which can filter by install_id).
#
# Usage
# -----
# ./screenpipe_sync.sh # syncs yesterday
# ./screenpipe_sync.sh 2026-04-15 # syncs a specific date
# ./screenpipe_sync.sh today # syncs today so far
# ./screenpipe_sync.sh --reset-install-id # rotate install_id and exit
# ./screenpipe_sync.sh --show-install-id # print install_id and exit
set -euo pipefail
# ─── CONFIG ───────────────────────────────────────────────────────────────────
DB_SRC="${SCREENPIPE_DB:-$HOME/.screenpipe/db.sqlite}"
NAS_MOUNT="${NAS_MOUNT:-/Volumes/screenpipe}"
NAS_DB="$NAS_MOUNT/archive.db"
NAS_DATA="$NAS_MOUNT/data"
[ Unknown Command: ^_ ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27990
|
|
27991
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
#!/bin/bash
# screenpipe_sync.sh
# Syncs Screenpipe SQLite data (vision + audio) to a NAS archive database.
# Append-only, no deletions.
#
# Key design points
# -----------------
# 1. Multi-install safe via install_id.
# Source IDs reset to 1 on every screenpipe reinstall. To avoid collisions
# in the NAS archive, every synced table gets an extra `install_id` column,
# and the logical primary key becomes (install_id, id) enforced by a
# unique index. The install_id is a UUID stored in
# ~/.screenpipe/.sync_install_id — wiping ~/.screenpipe/ (which is what
# happens on reinstall) discards it, so the next run generates a new one.
#
# 2. Schema-drift tolerant. If screenpipe migrations add new columns to the
# source DB, the NAS gets ALTER TABLE'd to match. Inserts use explicit
# column lists so positional mismatches can't occur.
#
# 3. FTS caveat. FTS tables in the NAS use source `id` as rowid. After a
# reinstall, INSERT OR IGNORE will silently skip rows whose id collides
# with a previous install's id, so FTS only reliably indexes the most
# recent install. Falls back to LIKE queries on the base tables for
# multi-install searches (which can filter by install_id).
#
# Usage
# -----
# ./screenpipe_sync.sh # syncs yesterday
# ./screenpipe_sync.sh 2026-04-15 # syncs a specific date
# ./screenpipe_sync.sh today # syncs today so far
# ./screenpipe_sync.sh --reset-install-id # rotate install_id and exit
# ./screenpipe_sync.sh --show-install-id # print install_id and exit
set -euo pipefail
# ─── CONFIG ───────────────────────────────────────────────────────────────────
DB_SRC="${SCREENPIPE_DB:-$HOME/.screenpipe/db.sqlite}"
NAS_MOUNT="${NAS_MOUNT:-/Volumes/screenpipe}"
NAS_DB="$NAS_MOUNT/archive.db"
NAS_DATA="$NAS_MOUNT/data"
[ Unknown Command: Ctrl-Down Arrow ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27991
|
|
27992
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
#!/bin/bash
# screenpipe_sync.sh
# Syncs Screenpipe SQLite data (vision + audio) to a NAS archive database.
# Append-only, no deletions.
#
# Key design points
# -----------------
# 1. Multi-install safe via install_id.
# Source IDs reset to 1 on every screenpipe reinstall. To avoid collisions
# in the NAS archive, every synced table gets an extra `install_id` column,
# and the logical primary key becomes (install_id, id) enforced by a
# unique index. The install_id is a UUID stored in
# ~/.screenpipe/.sync_install_id — wiping ~/.screenpipe/ (which is what
# happens on reinstall) discards it, so the next run generates a new one.
#
# 2. Schema-drift tolerant. If screenpipe migrations add new columns to the
# source DB, the NAS gets ALTER TABLE'd to match. Inserts use explicit
# column lists so positional mismatches can't occur.
#
# 3. FTS caveat. FTS tables in the NAS use source `id` as rowid. After a
# reinstall, INSERT OR IGNORE will silently skip rows whose id collides
# with a previous install's id, so FTS only reliably indexes the most
# recent install. Falls back to LIKE queries on the base tables for
# multi-install searches (which can filter by install_id).
#
# Usage
# -----
# ./screenpipe_sync.sh # syncs yesterday
# ./screenpipe_sync.sh 2026-04-15 # syncs a specific date
# ./screenpipe_sync.sh today # syncs today so far
# ./screenpipe_sync.sh --reset-install-id # rotate install_id and exit
# ./screenpipe_sync.sh --show-install-id # print install_id and exit
set -euo pipefail
# ─── CONFIG ───────────────────────────────────────────────────────────────────
DB_SRC="${SCREENPIPE_DB:-$HOME/.screenpipe/db.sqlite}"
NAS_MOUNT="${NAS_MOUNT:-/Volumes/screenpipe}"
NAS_DB="$NAS_MOUNT/archive.db"
NAS_DATA="$NAS_MOUNT/data"
[ Unknown Command: Ctrl-Down Arrow ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27992
|
|
27993
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
selected text to the left of the cursor, the
character under the cursor is not selected.
^U (F10) Uncut (paste) last cut text inserting it at the
current cursor position.
^I Insert a tab at the current cursor position.
^J (F4) Format (justify) the current paragraph.
Note: paragraphs delimited by blank lines or indentation.
^T (F12) To invoke the spelling checker
^C (F11) Report current cursor position
^R (F5) Insert an external file at the current cursor position.
^O (F3) Output the current buffer to a file, saving it.
^X (F2) Exit pico, saving buffer.
End of Help.
[ Unknown Command: Next Page ]
^Y Prev Pg
^X Exit Help
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27993
|
|
27994
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
selected text to the left of the cursor, the
character under the cursor is not selected.
^U (F10) Uncut (paste) last cut text inserting it at the
current cursor position.
^I Insert a tab at the current cursor position.
^J (F4) Format (justify) the current paragraph.
Note: paragraphs delimited by blank lines or indentation.
^T (F12) To invoke the spelling checker
^C (F11) Report current cursor position
^R (F5) Insert an external file at the current cursor position.
^O (F3) Output the current buffer to a file, saving it.
^X (F2) Exit pico, saving buffer.
End of Help.
[ Unknown Command: Next Page ]
^Y Prev Pg
^X Exit Help
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27994
|
|
27995
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27995
|
|
27996
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
# Skips install_id (which is NAS-only and managed separately).
ensure_columns() {
local table="$1"
local label="schema: $table"
printf " %-36s " "$label"
if ! table_exists "$DB_SRC" "$table"; then
printf "✗ source missing — skipping\n"
return 0
fi
if ! table_exists "$NAS_DB" "$table"; then
printf "✓ fresh (created above)\n"
return 0
fi
local src_cols
src_cols=$(table_columns_with_types "$DB_SRC" "$table")
local nas_cols
nas_cols=$(table_columns "$NAS_DB" "$table")
local added=0
local added_names=""
while IFS='|' read -r name type; do
[ -z "$name" ] && continue
if ! echo "$nas_cols" | grep -Fxq "$name"; then
sqlite3 "$NAS_DB" "ALTER TABLE $table ADD COLUMN \"$name\" $type;"
added=$((added + 1))
added_names="$added_names $name"
fi
done <<< "$src_cols"
if [ "$added" -gt 0 ]; then
printf "✓ added %d:%s\n" "$added" "$added_names"
else
printf "✓ in sync\n"
fi
}
# Comma-separated, double-quoted column list for a table from source DB.
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27996
|
|
27997
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
# Skips install_id (which is NAS-only and managed separately).
ensure_columns() {
local table="$1"
local label="schema: $table"
printf " %-36s " "$label"
if ! table_exists "$DB_SRC" "$table"; then
printf "✗ source missing — skipping\n"
return 0
fi
if ! table_exists "$NAS_DB" "$table"; then
printf "✓ fresh (created above)\n"
return 0
fi
local src_cols
src_cols=$(table_columns_with_types "$DB_SRC" "$table")
local nas_cols
nas_cols=$(table_columns "$NAS_DB" "$table")
local added=0
local added_names=""
while IFS='|' read -r name type; do
[ -z "$name" ] && continue
if ! echo "$nas_cols" | grep -Fxq "$name"; then
sqlite3 "$NAS_DB" "ALTER TABLE $table ADD COLUMN \"$name\" $type;"
added=$((added + 1))
added_names="$added_names $name"
fi
done <<< "$src_cols"
if [ "$added" -gt 0 ]; then
printf "✓ added %d:%s\n" "$added" "$added_names"
else
printf "✓ in sync\n"
fi
}
# Comma-separated, double-quoted column list for a table from source DB.
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
27997
|
|
28007
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
# Skips install_id (which is NAS-only and managed separately).
ensure_columns() {
local table="$1"
local label="schema: $table"
printf " %-36s " "$label"
if ! table_exists "$DB_SRC" "$table"; then
printf "✗ source missing — skipping\n"
return 0
fi
if ! table_exists "$NAS_DB" "$table"; then
printf "✓ fresh (created above)\n"
return 0
fi
local src_cols
src_cols=$(table_columns_with_types "$DB_SRC" "$table")
local nas_cols
nas_cols=$(table_columns "$NAS_DB" "$table")
local added=0
local added_names=""
while IFS='|' read -r name type; do
[ -z "$name" ] && continue
if ! echo "$nas_cols" | grep -Fxq "$name"; then
sqlite3 "$NAS_DB" "ALTER TABLE $table ADD COLUMN \"$name\" $type;"
added=$((added + 1))
added_names="$added_names $name"
fi
done <<< "$src_cols"
if [ "$added" -gt 0 ]; then
printf "✓ added %d:%s\n" "$added" "$added_names"
else
printf "✓ in sync\n"
fi
}
# Comma-separated, double-quoted column list for a table from source DB.
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
28007
|
|
28008
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
# Skips install_id (which is NAS-only and managed separately).
ensure_columns() {
local table="$1"
local label="schema: $table"
printf " %-36s " "$label"
if ! table_exists "$DB_SRC" "$table"; then
printf "✗ source missing — skipping\n"
return 0
fi
if ! table_exists "$NAS_DB" "$table"; then
printf "✓ fresh (created above)\n"
return 0
fi
local src_cols
src_cols=$(table_columns_with_types "$DB_SRC" "$table")
local nas_cols
nas_cols=$(table_columns "$NAS_DB" "$table")
local added=0
local added_names=""
while IFS='|' read -r name type; do
[ -z "$name" ] && continue
if ! echo "$nas_cols" | grep -Fxq "$name"; then
sqlite3 "$NAS_DB" "ALTER TABLE $table ADD COLUMN \"$name\" $type;"
added=$((added + 1))
added_names="$added_names $name"
fi
done <<< "$src_cols"
if [ "$added" -gt 0 ]; then
printf "✓ added %d:%s\n" "$added" "$added_names"
else
printf "✓ in sync\n"
fi
}
# Comma-separated, double-quoted column list for a table from source DB.
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
28008
|
|
28009
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
# Skips install_id (which is NAS-only and managed separately).
ensure_columns() {
local table="$1"
local label="schema: $table"
printf " %-36s " "$label"
if ! table_exists "$DB_SRC" "$table"; then
printf "✗ source missing — skipping\n"
return 0
fi
if ! table_exists "$NAS_DB" "$table"; then
printf "✓ fresh (created above)\n"
return 0
fi
local src_cols
src_cols=$(table_columns_with_types "$DB_SRC" "$table")
local nas_cols
nas_cols=$(table_columns "$NAS_DB" "$table")
local added=0
local added_names=""
while IFS='|' read -r name type; do
[ -z "$name" ] && continue
if ! echo "$nas_cols" | grep -Fxq "$name"; then
sqlite3 "$NAS_DB" "ALTER TABLE $table ADD COLUMN \"$name\" $type;"
added=$((added + 1))
added_names="$added_names $name"
fi
done <<< "$src_cols"
if [ "$added" -gt 0 ]; then
printf "✓ added %d:%s\n" "$added" "$added_names"
else
printf "✓ in sync\n"
fi
}
# Comma-separated, double-quoted column list for a table from source DB.
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
28009
|
|
28020
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
# Skips install_id (which is NAS-only and managed separately).
ensure_columns() {
local table="$1"
local label="schema: $table"
printf " %-36s " "$label"
if ! table_exists "$DB_SRC" "$table"; then
printf "✗ source missing — skipping\n"
return 0
fi
if ! table_exists "$NAS_DB" "$table"; then
printf "✓ fresh (created above)\n"
return 0
fi
local src_cols
src_cols=$(table_columns_with_types "$DB_SRC" "$table")
local nas_cols
nas_cols=$(table_columns "$NAS_DB" "$table")
local added=0
local added_names=""
while IFS='|' read -r name type; do
[ -z "$name" ] && continue
if ! echo "$nas_cols" | grep -Fxq "$name"; then
sqlite3 "$NAS_DB" "ALTER TABLE $table ADD COLUMN \"$name\" $type;"
added=$((added + 1))
added_names="$added_names $name"
fi
done <<< "$src_cols"
if [ "$added" -gt 0 ]; then
printf "✓ added %d:%s\n" "$added" "$added_names"
else
printf "✓ in sync\n"
fi
}
# Comma-separated, double-quoted column list for a table from source DB.
[ line 159 of 696 (22%), character 5153 of 29289 (17%) ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
28020
|
|
28021
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
# Skips install_id (which is NAS-only and managed separately).
ensure_columns() {
local table="$1"
local label="schema: $table"
printf " %-36s " "$label"
if ! table_exists "$DB_SRC" "$table"; then
printf "✗ source missing — skipping\n"
return 0
fi
if ! table_exists "$NAS_DB" "$table"; then
printf "✓ fresh (created above)\n"
return 0
fi
local src_cols
src_cols=$(table_columns_with_types "$DB_SRC" "$table")
local nas_cols
nas_cols=$(table_columns "$NAS_DB" "$table")
local added=0
local added_names=""
while IFS='|' read -r name type; do
[ -z "$name" ] && continue
if ! echo "$nas_cols" | grep -Fxq "$name"; then
sqlite3 "$NAS_DB" "ALTER TABLE $table ADD COLUMN \"$name\" $type;"
added=$((added + 1))
added_names="$added_names $name"
fi
done <<< "$src_cols"
if [ "$added" -gt 0 ]; then
printf "✓ added %d:%s\n" "$added" "$added_names"
else
printf "✓ in sync\n"
fi
}
# Comma-separated, double-quoted column list for a table from source DB.
[ line 159 of 696 (22%), character 5153 of 29289 (17%) ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
28021
|
|
28022
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
# Skips install_id (which is NAS-only and managed separately).
ensure_columns() {
local table="$1"
local label="schema: $table"
printf " %-36s " "$label"
if ! table_exists "$DB_SRC" "$table"; then
printf "✗ source missing — skipping\n"
return 0
fi
if ! table_exists "$NAS_DB" "$table"; then
printf "✓ fresh (created above)\n"
return 0
fi
local src_cols
src_cols=$(table_columns_with_types "$DB_SRC" "$table")
local nas_cols
nas_cols=$(table_columns "$NAS_DB" "$table")
local added=0
local added_names=""
while IFS='|' read -r name type; do
[ -z "$name" ] && continue
if ! echo "$nas_cols" | grep -Fxq "$name"; then
sqlite3 "$NAS_DB" "ALTER TABLE $table ADD COLUMN \"$name\" $type;"
added=$((added + 1))
added_names="$added_names $name"
fi
done <<< "$src_cols"
if [ "$added" -gt 0 ]; then
printf "✓ added %d:%s\n" "$added" "$added_names"
else
printf "✓ in sync\n"
fi
}
# Comma-separated, double-quoted column list for a table from source DB.
[ line 159 of 696 (22%), character 5153 of 29289 (17%) ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
28022
|
|
28023
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
[2026-05-12 20:19:37] ========================================
[2026-05-12 20:19:37] Screenpipe sync starting for: 2026-05-11
[2026-05-12 20:19:37] install_id: 2ff6574c-4272-4dbf-a20b-434b024c65fb
[2026-05-12 20:19:37] ========================================
[+00m00s] ▶ Preflight checks
Source DB: OK (4.2G)
NAS mount: OK /Volumes/screenpipe
Archive DB: will be created
Frame data dir: OK (283 files, 318M)
Audio files: OK (2507 files, 267M)
[+00m00s] ▶ Counting source rows for 2026-05-11
frames: 6857
elements: 672129
ui_events: 7063
ocr_text: 2332
meetings: 1
audio_chunks: 2507
audio_transcriptions: 226
audio_tags: 0
speakers: 15 (all-time)
speaker_embeddings: 58 (all-time)
[+00m01s] ▶ Initialising tables (CREATE IF NOT EXISTS)
creating vision tables ✓ 0m00s
creating audio tables ✓ 0m01s
Error: in prepare, no such column: id
S idx_ocr_text_install_pk ON ocr_text(install_id, id);
error here ---^
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ sqlite3 ~/.screenpipe/db.sqlite "PRAGMA table_info(ocr_text);"
0|frame_id|INTEGER|1||0
1|text|TEXT|1||0
2|text_json|TEXT|0||0
3|app_name|TEXT|1|''|0
4|ocr_engine|TEXT|1|'unknown'|0
5|window_name|TEXT|0||0
6|focused|BOOLEAN|0|FALSE|0
7|text_length|INTEGER|0||0
8|sync_id|TEXT|0||0
9|synced_at|DATETIME|0||0
10|redacted_at|INTEGER|0||0
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
-zsh
Close Tab
⌥⌘1
-zsh...
|
iTerm2
|
-zsh
|
NULL
|
28023
|
|
28029
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
[2026-05-12 20:19:37] ========================================
[2026-05-12 20:19:37] Screenpipe sync starting for: 2026-05-11
[2026-05-12 20:19:37] install_id: 2ff6574c-4272-4dbf-a20b-434b024c65fb
[2026-05-12 20:19:37] ========================================
[+00m00s] ▶ Preflight checks
Source DB: OK (4.2G)
NAS mount: OK /Volumes/screenpipe
Archive DB: will be created
Frame data dir: OK (283 files, 318M)
Audio files: OK (2507 files, 267M)
[+00m00s] ▶ Counting source rows for 2026-05-11
frames: 6857
elements: 672129
ui_events: 7063
ocr_text: 2332
meetings: 1
audio_chunks: 2507
audio_transcriptions: 226
audio_tags: 0
speakers: 15 (all-time)
speaker_embeddings: 58 (all-time)
[+00m01s] ▶ Initialising tables (CREATE IF NOT EXISTS)
creating vision tables ✓ 0m00s
creating audio tables ✓ 0m01s
Error: in prepare, no such column: id
S idx_ocr_text_install_pk ON ocr_text(install_id, id);
error here ---^
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ sqlite3 ~/.screenpipe/db.sqlite "PRAGMA table_info(ocr_text);"
0|frame_id|INTEGER|1||0
1|text|TEXT|1||0
2|text_json|TEXT|0||0
3|app_name|TEXT|1|''|0
4|ocr_engine|TEXT|1|'unknown'|0
5|window_name|TEXT|0||0
6|focused|BOOLEAN|0|FALSE|0
7|text_length|INTEGER|0||0
8|sync_id|TEXT|0||0
9|synced_at|DATETIME|0||0
10|redacted_at|INTEGER|0||0
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
-zsh
Close Tab
⌥⌘1
-zsh...
|
iTerm2
|
-zsh
|
NULL
|
28029
|
|
28030
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
[2026-05-12 20:19:37] ========================================
[2026-05-12 20:19:37] Screenpipe sync starting for: 2026-05-11
[2026-05-12 20:19:37] install_id: 2ff6574c-4272-4dbf-a20b-434b024c65fb
[2026-05-12 20:19:37] ========================================
[+00m00s] ▶ Preflight checks
Source DB: OK (4.2G)
NAS mount: OK /Volumes/screenpipe
Archive DB: will be created
Frame data dir: OK (283 files, 318M)
Audio files: OK (2507 files, 267M)
[+00m00s] ▶ Counting source rows for 2026-05-11
frames: 6857
elements: 672129
ui_events: 7063
ocr_text: 2332
meetings: 1
audio_chunks: 2507
audio_transcriptions: 226
audio_tags: 0
speakers: 15 (all-time)
speaker_embeddings: 58 (all-time)
[+00m01s] ▶ Initialising tables (CREATE IF NOT EXISTS)
creating vision tables ✓ 0m00s
creating audio tables ✓ 0m01s
Error: in prepare, no such column: id
S idx_ocr_text_install_pk ON ocr_text(install_id, id);
error here ---^
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ sqlite3 ~/.screenpipe/db.sqlite "PRAGMA table_info(ocr_text);"
0|frame_id|INTEGER|1||0
1|text|TEXT|1||0
2|text_json|TEXT|0||0
3|app_name|TEXT|1|''|0
4|ocr_engine|TEXT|1|'unknown'|0
5|window_name|TEXT|0||0
6|focused|BOOLEAN|0|FALSE|0
7|text_length|INTEGER|0||0
8|sync_id|TEXT|0||0
9|synced_at|DATETIME|0||0
10|redacted_at|INTEGER|0||0
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
-zsh
Close Tab
⌥⌘1
-zsh...
|
iTerm2
|
-zsh
|
NULL
|
28030
|
|
28031
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
[2026-05-12 20:19:37] ========================================
[2026-05-12 20:19:37] Screenpipe sync starting for: 2026-05-11
[2026-05-12 20:19:37] install_id: 2ff6574c-4272-4dbf-a20b-434b024c65fb
[2026-05-12 20:19:37] ========================================
[+00m00s] ▶ Preflight checks
Source DB: OK (4.2G)
NAS mount: OK /Volumes/screenpipe
Archive DB: will be created
Frame data dir: OK (283 files, 318M)
Audio files: OK (2507 files, 267M)
[+00m00s] ▶ Counting source rows for 2026-05-11
frames: 6857
elements: 672129
ui_events: 7063
ocr_text: 2332
meetings: 1
audio_chunks: 2507
audio_transcriptions: 226
audio_tags: 0
speakers: 15 (all-time)
speaker_embeddings: 58 (all-time)
[+00m01s] ▶ Initialising tables (CREATE IF NOT EXISTS)
creating vision tables ✓ 0m00s
creating audio tables ✓ 0m01s
Error: in prepare, no such column: id
S idx_ocr_text_install_pk ON ocr_text(install_id, id);
error here ---^
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ sqlite3 ~/.screenpipe/db.sqlite "PRAGMA table_info(ocr_text);"
0|frame_id|INTEGER|1||0
1|text|TEXT|1||0
2|text_json|TEXT|0||0
3|app_name|TEXT|1|''|0
4|ocr_engine|TEXT|1|'unknown'|0
5|window_name|TEXT|0||0
6|focused|BOOLEAN|0|FALSE|0
7|text_length|INTEGER|0||0
8|sync_id|TEXT|0||0
9|synced_at|DATETIME|0||0
10|redacted_at|INTEGER|0||0
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
-zsh
Close Tab
⌥⌘1
-zsh...
|
iTerm2
|
-zsh
|
NULL
|
28031
|
|
28032
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
[2026-05-12 20:19:37] ========================================
UW PICO 5.09 New Buffer
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 New Buffer
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
28032
|
|
28033
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
[2026-05-12 20:19:37] ========================================
UW PICO 5.09 New Buffer
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
[2026-05-12 20:19:37] Screenpipe sync starting for: 2026-05-11
[2026-05-12 20:19:37] install_id: 2ff6574c-4272-4dbf-a20b-434b024c65fb
[2026-05-12 20:19:37] ========================================
[+00m00s] ▶ Preflight checks
Source DB: OK (4.2G)
NAS mount: OK /Volumes/screenpipe
Archive DB: will be created
Frame data dir: OK (283 files, 318M)
Audio files: OK (2507 files, 267M)
[+00m00s] ▶ Counting source rows for 2026-05-11
frames: 6857
elements: 672129
ui_events: 7063
ocr_text: 2332
meetings: 1
audio_chunks: 2507
audio_transcriptions: 226
audio_tags: 0
speakers: 15 (all-time)
speaker_embeddings: 58 (all-time)
[+00m01s] ▶ Initialising tables (CREATE IF NOT EXISTS)
creating vision tables ✓ 0m00s
creating audio tables ✓ 0m01s
Error: in prepare, no such column: id
S idx_ocr_text_install_pk ON ocr_text(install_id, id);
error here ---^
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ sqlite3 ~/.screenpipe/db.sqlite "PRAGMA table_info(ocr_text);"
0|frame_id|INTEGER|1||0
1|text|TEXT|1||0
2|text_json|TEXT|0||0
3|app_name|TEXT|1|''|0
4|ocr_engine|TEXT|1|'unknown'|0
5|window_name|TEXT|0||0
6|focused|BOOLEAN|0|FALSE|0
7|text_length|INTEGER|0||0
8|sync_id|TEXT|0||0
9|synced_at|DATETIME|0||0
10|redacted_at|INTEGER|0||0
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano --version
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
-zsh
Close Tab
⌥⌘1
-zsh...
|
iTerm2
|
-zsh
|
NULL
|
28033
|
|
28034
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
[2026-05-12 20:19:37] ========================================
UW PICO 5.09 New Buffer
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
[2026-05-12 20:19:37] Screenpipe sync starting for: 2026-05-11
[2026-05-12 20:19:37] install_id: 2ff6574c-4272-4dbf-a20b-434b024c65fb
[2026-05-12 20:19:37] ========================================
[+00m00s] ▶ Preflight checks
Source DB: OK (4.2G)
NAS mount: OK /Volumes/screenpipe
Archive DB: will be created
Frame data dir: OK (283 files, 318M)
Audio files: OK (2507 files, 267M)
[+00m00s] ▶ Counting source rows for 2026-05-11
frames: 6857
elements: 672129
ui_events: 7063
ocr_text: 2332
meetings: 1
audio_chunks: 2507
audio_transcriptions: 226
audio_tags: 0
speakers: 15 (all-time)
speaker_embeddings: 58 (all-time)
[+00m01s] ▶ Initialising tables (CREATE IF NOT EXISTS)
creating vision tables ✓ 0m00s
creating audio tables ✓ 0m01s
Error: in prepare, no such column: id
S idx_ocr_text_install_pk ON ocr_text(install_id, id);
error here ---^
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ sqlite3 ~/.screenpipe/db.sqlite "PRAGMA table_info(ocr_text);"
0|frame_id|INTEGER|1||0
1|text|TEXT|1||0
2|text_json|TEXT|0||0
3|app_name|TEXT|1|''|0
4|ocr_engine|TEXT|1|'unknown'|0
5|window_name|TEXT|0||0
6|focused|BOOLEAN|0|FALSE|0
7|text_length|INTEGER|0||0
8|sync_id|TEXT|0||0
9|synced_at|DATETIME|0||0
10|redacted_at|INTEGER|0||0
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano --version
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
-zsh
Close Tab
⌥⌘1
-zsh...
|
iTerm2
|
-zsh
|
NULL
|
28034
|
|
28035
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
[2026-05-12 20:19:37] ========================================
UW PICO 5.09 New Buffer
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
[2026-05-12 20:19:37] Screenpipe sync starting for: 2026-05-11
[2026-05-12 20:19:37] install_id: 2ff6574c-4272-4dbf-a20b-434b024c65fb
[2026-05-12 20:19:37] ========================================
[+00m00s] ▶ Preflight checks
Source DB: OK (4.2G)
NAS mount: OK /Volumes/screenpipe
Archive DB: will be created
Frame data dir: OK (283 files, 318M)
Audio files: OK (2507 files, 267M)
[+00m00s] ▶ Counting source rows for 2026-05-11
frames: 6857
elements: 672129
ui_events: 7063
ocr_text: 2332
meetings: 1
audio_chunks: 2507
audio_transcriptions: 226
audio_tags: 0
speakers: 15 (all-time)
speaker_embeddings: 58 (all-time)
[+00m01s] ▶ Initialising tables (CREATE IF NOT EXISTS)
creating vision tables ✓ 0m00s
creating audio tables ✓ 0m01s
Error: in prepare, no such column: id
S idx_ocr_text_install_pk ON ocr_text(install_id, id);
error here ---^
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ sqlite3 ~/.screenpipe/db.sqlite "PRAGMA table_info(ocr_text);"
0|frame_id|INTEGER|1||0
1|text|TEXT|1||0
2|text_json|TEXT|0||0
3|app_name|TEXT|1|''|0
4|ocr_engine|TEXT|1|'unknown'|0
5|window_name|TEXT|0||0
6|focused|BOOLEAN|0|FALSE|0
7|text_length|INTEGER|0||0
8|sync_id|TEXT|0||0
9|synced_at|DATETIME|0||0
10|redacted_at|INTEGER|0||0
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano --version
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
-zsh
Close Tab
⌥⌘1
-zsh...
|
iTerm2
|
-zsh
|
NULL
|
28035
|
|
28036
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
[2026-05-12 20:19:37] ========================================
UW PICO 5.09 New Buffer
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
[2026-05-12 20:19:37] Screenpipe sync starting for: 2026-05-11
[2026-05-12 20:19:37] install_id: 2ff6574c-4272-4dbf-a20b-434b024c65fb
[2026-05-12 20:19:37] ========================================
[+00m00s] ▶ Preflight checks
Source DB: OK (4.2G)
NAS mount: OK /Volumes/screenpipe
Archive DB: will be created
Frame data dir: OK (283 files, 318M)
Audio files: OK (2507 files, 267M)
[+00m00s] ▶ Counting source rows for 2026-05-11
frames: 6857
elements: 672129
ui_events: 7063
ocr_text: 2332
meetings: 1
audio_chunks: 2507
audio_transcriptions: 226
audio_tags: 0
speakers: 15 (all-time)
speaker_embeddings: 58 (all-time)
[+00m01s] ▶ Initialising tables (CREATE IF NOT EXISTS)
creating vision tables ✓ 0m00s
creating audio tables ✓ 0m01s
Error: in prepare, no such column: id
S idx_ocr_text_install_pk ON ocr_text(install_id, id);
error here ---^
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ sqlite3 ~/.screenpipe/db.sqlite "PRAGMA table_info(ocr_text);"
0|frame_id|INTEGER|1||0
1|text|TEXT|1||0
2|text_json|TEXT|0||0
3|app_name|TEXT|1|''|0
4|ocr_engine|TEXT|1|'unknown'|0
5|window_name|TEXT|0||0
6|focused|BOOLEAN|0|FALSE|0
7|text_length|INTEGER|0||0
8|sync_id|TEXT|0||0
9|synced_at|DATETIME|0||0
10|redacted_at|INTEGER|0||0
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano --version
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
-zsh
Close Tab
⌥⌘1
-zsh...
|
iTerm2
|
-zsh
|
NULL
|
28036
|
|
28037
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
[2026-05-12 20:19:37] ========================================
UW PICO 5.09 New Buffer
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
[2026-05-12 20:19:37] Screenpipe sync starting for: 2026-05-11
[2026-05-12 20:19:37] install_id: 2ff6574c-4272-4dbf-a20b-434b024c65fb
[2026-05-12 20:19:37] ========================================
[+00m00s] ▶ Preflight checks
Source DB: OK (4.2G)
NAS mount: OK /Volumes/screenpipe
Archive DB: will be created
Frame data dir: OK (283 files, 318M)
Audio files: OK (2507 files, 267M)
[+00m00s] ▶ Counting source rows for 2026-05-11
frames: 6857
elements: 672129
ui_events: 7063
ocr_text: 2332
meetings: 1
audio_chunks: 2507
audio_transcriptions: 226
audio_tags: 0
speakers: 15 (all-time)
speaker_embeddings: 58 (all-time)
[+00m01s] ▶ Initialising tables (CREATE IF NOT EXISTS)
creating vision tables ✓ 0m00s
creating audio tables ✓ 0m01s
Error: in prepare, no such column: id
S idx_ocr_text_install_pk ON ocr_text(install_id, id);
error here ---^
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ sqlite3 ~/.screenpipe/db.sqlite "PRAGMA table_info(ocr_text);"
0|frame_id|INTEGER|1||0
1|text|TEXT|1||0
2|text_json|TEXT|0||0
3|app_name|TEXT|1|''|0
4|ocr_engine|TEXT|1|'unknown'|0
5|window_name|TEXT|0||0
6|focused|BOOLEAN|0|FALSE|0
7|text_length|INTEGER|0||0
8|sync_id|TEXT|0||0
9|synced_at|DATETIME|0||0
10|redacted_at|INTEGER|0||0
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano --version
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
-zsh
Close Tab
⌥⌘1
-zsh...
|
iTerm2
|
-zsh
|
NULL
|
28037
|
|
28046
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
[2026-05-12 20:19:37] ========================================
UW PICO 5.09 New Buffer
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
[2026-05-12 20:19:37] Screenpipe sync starting for: 2026-05-11
[2026-05-12 20:19:37] install_id: 2ff6574c-4272-4dbf-a20b-434b024c65fb
[2026-05-12 20:19:37] ========================================
[+00m00s] ▶ Preflight checks
Source DB: OK (4.2G)
NAS mount: OK /Volumes/screenpipe
Archive DB: will be created
Frame data dir: OK (283 files, 318M)
Audio files: OK (2507 files, 267M)
[+00m00s] ▶ Counting source rows for 2026-05-11
frames: 6857
elements: 672129
ui_events: 7063
ocr_text: 2332
meetings: 1
audio_chunks: 2507
audio_transcriptions: 226
audio_tags: 0
speakers: 15 (all-time)
speaker_embeddings: 58 (all-time)
[+00m01s] ▶ Initialising tables (CREATE IF NOT EXISTS)
creating vision tables ✓ 0m00s
creating audio tables ✓ 0m01s
Error: in prepare, no such column: id
S idx_ocr_text_install_pk ON ocr_text(install_id, id);
error here ---^
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ sqlite3 ~/.screenpipe/db.sqlite "PRAGMA table_info(ocr_text);"
0|frame_id|INTEGER|1||0
1|text|TEXT|1||0
2|text_json|TEXT|0||0
3|app_name|TEXT|1|''|0
4|ocr_engine|TEXT|1|'unknown'|0
5|window_name|TEXT|0||0
6|focused|BOOLEAN|0|FALSE|0
7|text_length|INTEGER|0||0
8|sync_id|TEXT|0||0
9|synced_at|DATETIME|0||0
10|redacted_at|INTEGER|0||0
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano --version
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
-zsh
Close Tab
⌥⌘1
-zsh...
|
iTerm2
|
-zsh
|
NULL
|
28046
|
|
28047
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
[2026-05-12 20:19:37] ========================================
UW PICO 5.09 New Buffer
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
[2026-05-12 20:19:37] Screenpipe sync starting for: 2026-05-11
[2026-05-12 20:19:37] install_id: 2ff6574c-4272-4dbf-a20b-434b024c65fb
[2026-05-12 20:19:37] ========================================
[+00m00s] ▶ Preflight checks
Source DB: OK (4.2G)
NAS mount: OK /Volumes/screenpipe
Archive DB: will be created
Frame data dir: OK (283 files, 318M)
Audio files: OK (2507 files, 267M)
[+00m00s] ▶ Counting source rows for 2026-05-11
frames: 6857
elements: 672129
ui_events: 7063
ocr_text: 2332
meetings: 1
audio_chunks: 2507
audio_transcriptions: 226
audio_tags: 0
speakers: 15 (all-time)
speaker_embeddings: 58 (all-time)
[+00m01s] ▶ Initialising tables (CREATE IF NOT EXISTS)
creating vision tables ✓ 0m00s
creating audio tables ✓ 0m01s
Error: in prepare, no such column: id
S idx_ocr_text_install_pk ON ocr_text(install_id, id);
error here ---^
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ sqlite3 ~/.screenpipe/db.sqlite "PRAGMA table_info(ocr_text);"
0|frame_id|INTEGER|1||0
1|text|TEXT|1||0
2|text_json|TEXT|0||0
3|app_name|TEXT|1|''|0
4|ocr_engine|TEXT|1|'unknown'|0
5|window_name|TEXT|0||0
6|focused|BOOLEAN|0|FALSE|0
7|text_length|INTEGER|0||0
8|sync_id|TEXT|0||0
9|synced_at|DATETIME|0||0
10|redacted_at|INTEGER|0||0
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano screenpipe_sync.sh
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ nano --version
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
-zsh
Close Tab
⌥⌘1
-zsh...
|
iTerm2
|
-zsh
|
NULL
|
28047
|
|
28048
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
[2026-05-12 20:19:37] ========================================
UW PICO 5.09 New Buffer
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
[2026-05-12 20:19:37] Screenpipe sync starting for: 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
#!/bin/bash
# screenpipe_sync.sh
# Syncs Screenpipe SQLite data (vision + audio) to a NAS archive database.
# Append-only, no deletions.
#
# Key design points
# -----------------
# 1. Multi-install safe via install_id.
# Source IDs reset to 1 on every screenpipe reinstall. To avoid collisions
# in the NAS archive, every synced table gets an extra `install_id` column,
# and the logical primary key becomes (install_id, id) enforced by a
# unique index. The install_id is a UUID stored in
# ~/.screenpipe/.sync_install_id — wiping ~/.screenpipe/ (which is what
# happens on reinstall) discards it, so the next run generates a new one.
#
# 2. Schema-drift tolerant. If screenpipe migrations add new columns to the
# source DB, the NAS gets ALTER TABLE'd to match. Inserts use explicit
# column lists so positional mismatches can't occur.
#
# 3. FTS caveat. FTS tables in the NAS use source `id` as rowid. After a
# reinstall, INSERT OR IGNORE will silently skip rows whose id collides
# with a previous install's id, so FTS only reliably indexes the most
# recent install. Falls back to LIKE queries on the base tables for
# multi-install searches (which can filter by install_id).
#
# Usage
# -----
# ./screenpipe_sync.sh # syncs yesterday
# ./screenpipe_sync.sh 2026-04-15 # syncs a specific date
# ./screenpipe_sync.sh today # syncs today so far
# ./screenpipe_sync.sh --reset-install-id # rotate install_id and exit
# ./screenpipe_sync.sh --show-install-id # print install_id and exit
set -euo pipefail
# ─── CONFIG ───────────────────────────────────────────────────────────────────
DB_SRC="${SCREENPIPE_DB:-$HOME/.screenpipe/db.sqlite}"
NAS_MOUNT="${NAS_MOUNT:-/Volumes/screenpipe}"
NAS_DB="$NAS_MOUNT/archive.db"
NAS_DATA="$NAS_MOUNT/data"
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
28048
|
|
28049
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
[2026-05-12 20:19:37] ========================================
UW PICO 5.09 New Buffer
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
[2026-05-12 20:19:37] Screenpipe sync starting for: 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
——#!/bin/bash
# screenpipe_sync.sh
# Syncs Screenpipe SQLite data (vision + audio) to a NAS archive database.
# Append-only, no deletions.
#
# Key design points
# -----------------
# 1. Multi-install safe via install_id.
# Source IDs reset to 1 on every screenpipe reinstall. To avoid collisions
# in the NAS archive, every synced table gets an extra `install_id` column,
# and the logical primary key becomes (install_id, id) enforced by a
# unique index. The install_id is a UUID stored in
# ~/.screenpipe/.sync_install_id — wiping ~/.screenpipe/ (which is what
# happens on reinstall) discards it, so the next run generates a new one.
#
# 2. Schema-drift tolerant. If screenpipe migrations add new columns to the
# source DB, the NAS gets ALTER TABLE'd to match. Inserts use explicit
# column lists so positional mismatches can't occur.
#
# 3. FTS caveat. FTS tables in the NAS use source `id` as rowid. After a
# reinstall, INSERT OR IGNORE will silently skip rows whose id collides
# with a previous install's id, so FTS only reliably indexes the most
# recent install. Falls back to LIKE queries on the base tables for
# multi-install searches (which can filter by install_id).
#
# Usage
# -----
# ./screenpipe_sync.sh # syncs yesterday
# ./screenpipe_sync.sh 2026-04-15 # syncs a specific date
# ./screenpipe_sync.sh today # syncs today so far
# ./screenpipe_sync.sh --reset-install-id # rotate install_id and exit
# ./screenpipe_sync.sh --show-install-id # print install_id and exit
set -euo pipefail
# ─── CONFIG ───────────────────────────────────────────────────────────────────
DB_SRC="${SCREENPIPE_DB:-$HOME/.screenpipe/db.sqlite}"
NAS_MOUNT="${NAS_MOUNT:-/Volumes/screenpipe}"
NAS_DB="$NAS_MOUNT/archive.db"
NAS_DATA="$NAS_MOUNT/data"
[ line 1 of 696 (0%), character 1 of 29290 (0%) ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
28049
|
|
28050
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
[2026-05-12 20:19:37] ========================================
UW PICO 5.09 New Buffer
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
[2026-05-12 20:19:37] Screenpipe sync starting for: 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
——#!/bin/bash
# screenpipe_sync.sh
# Syncs Screenpipe SQLite data (vision + audio) to a NAS archive database.
# Append-only, no deletions.
#
# Key design points
# -----------------
# 1. Multi-install safe via install_id.
# Source IDs reset to 1 on every screenpipe reinstall. To avoid collisions
# in the NAS archive, every synced table gets an extra `install_id` column,
# and the logical primary key becomes (install_id, id) enforced by a
# unique index. The install_id is a UUID stored in
# ~/.screenpipe/.sync_install_id — wiping ~/.screenpipe/ (which is what
# happens on reinstall) discards it, so the next run generates a new one.
#
# 2. Schema-drift tolerant. If screenpipe migrations add new columns to the
# source DB, the NAS gets ALTER TABLE'd to match. Inserts use explicit
# column lists so positional mismatches can't occur.
#
# 3. FTS caveat. FTS tables in the NAS use source `id` as rowid. After a
# reinstall, INSERT OR IGNORE will silently skip rows whose id collides
# with a previous install's id, so FTS only reliably indexes the most
# recent install. Falls back to LIKE queries on the base tables for
# multi-install searches (which can filter by install_id).
#
# Usage
# -----
# ./screenpipe_sync.sh # syncs yesterday
# ./screenpipe_sync.sh 2026-04-15 # syncs a specific date
# ./screenpipe_sync.sh today # syncs today so far
# ./screenpipe_sync.sh --reset-install-id # rotate install_id and exit
# ./screenpipe_sync.sh --show-install-id # print install_id and exit
set -euo pipefail
# ─── CONFIG ───────────────────────────────────────────────────────────────────
DB_SRC="${SCREENPIPE_DB:-$HOME/.screenpipe/db.sqlite}"
NAS_MOUNT="${NAS_MOUNT:-/Volumes/screenpipe}"
NAS_DB="$NAS_MOUNT/archive.db"
NAS_DATA="$NAS_MOUNT/data"
[ line 1 of 696 (0%), character 1 of 29290 (0%) ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
28050
|
|
28051
|
Last login: Tue May 12 20:12:05 on ttys007
Poetry Last login: Tue May 12 20:12:05 on ttys007
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
Poetry could not find a pyproject.toml file in /Users/lukas/jiminny/app or its parents
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ open ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/jiminny/app (JY-20725-handle-HS-search-rate-limit) $ cd ~/.screenpipe
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ll
total 8720288
drwxr-xr-x 21 lukas staff 672 12 May 09:21 .
drwx------+ 96 lukas staff 3072 12 May 20:12 ..
-rw-r--r--@ 1 lukas staff 6148 12 May 20:14 .DS_Store
-rw-r--r--@ 1 lukas staff 37 11 May 20:54 .sync_install_id
-rw-r--r-- 1 lukas staff 0 10 May 14:43 clipboard-disabled-after-crash
drwxr-xr-x 3660 lukas staff 117120 12 May 17:41 data
-rw-r--r--@ 1 lukas staff 4457357312 12 May 17:41 db.sqlite
-rw-r--r-- 1 lukas staff 65536 12 May 09:26 db.sqlite-shm
-rw-r--r-- 1 lukas staff 5001712 12 May 17:41 db.sqlite-wal
drwxr-xr-x 9 lukas staff 288 10 May 11:39 pipes
-rw-r--r-- 1 lukas staff 28408 6 May 21:02 screenpipe.2026-05-06.0.log
-rw-r--r-- 1 lukas staff 566164 7 May 21:50 screenpipe.2026-05-07.0.log
-rw-r--r-- 1 lukas staff 382102 8 May 22:20 screenpipe.2026-05-08.0.log
-rw-r--r-- 1 lukas staff 167023 9 May 23:04 screenpipe.2026-05-09.0.log
-rw-r--r-- 1 lukas staff 88266 10 May 23:51 screenpipe.2026-05-10.0.log
-rw-r--r-- 1 lukas staff 528943 11 May 22:54 screenpipe.2026-05-11.0.log
-rw-r--r-- 1 lukas staff 245484 12 May 17:39 screenpipe.2026-05-12.0.log
-rwxr-xr-x@ 1 lukas staff 32005 11 May 20:54 screenpipe_sync.sh
-rwxr-xr-x@ 1 lukas staff 14994 6 May 20:26 screenpipe_sync.sh.bak
-rwxr-xr-x@ 1 lukas staff 21485 10 May 13:34 screenpipe_sync.sh.bak2
-rw-r--r--@ 1 lukas staff 8541 11 May 20:54 sync.log
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ cat screenpipe_sync.sh | pbcopy
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
^X Exit Help ^V Next Pg
lukas@Lukas-Kovaliks-MacBook-Pro-Jiminny ~/.screenpipe $ ~/.screenpipe/screenpipe_sync.sh 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: ]
^X Exit Help ^V Next Pg
UW PICO 5.09 File: screenpipe_sync.sh Modified
Pico Help Text
Pico is designed to be a simple, easy-to-use text editor with a
layout very similar to the Alpine mailer. The status line at the
top of the display shows pico's version, the current file being
edited and whether or not there are outstanding modifications
that have not been saved. The third line from the bottom is used
to report informational messages and for additional command input.
The bottom two lines list the available editing commands.
Each character typed is automatically inserted into the buffer
at the current cursor position. Editing commands and cursor
movement (besides arrow keys) are given to pico by typing
special control-key sequences. A caret, '^', is used to denote
the control key, sometimes marked "CTRL", so the CTRL-q key
combination is written as ^Q.
The following functions are available in pico (where applicable,
corresponding function key commands are in parentheses).
^G (F1) Display this help text.
^F move Forward a character.
^B move Backward a character.
^P move to the Previous line.
^N move to the Next line.
^A move to the beginning of the current line.
^E move to the End of the current line.
^V (F8) move forward a page of text.
^Y (F7) move backward a page of text.
^W (F6) Search for (where is) text, neglecting case.
^L Refresh the display.
^D Delete the character at the cursor position.
^^ Mark cursor position as beginning of selected text.
Note: Setting mark when already set unselects text.
^K (F9) Cut selected text (displayed in inverse characters).
Note: The selected text's boundary on the cursor side
ends at the left edge of the cursor. So, with
[ Unknown Command: Next Page ]
^X Exit Help ^V Next Pg
[2026-05-12 20:19:37] ========================================
UW PICO 5.09 New Buffer
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
[2026-05-12 20:19:37] Screenpipe sync starting for: 2026-05-11
UW PICO 5.09 New Buffer
[ Read 695 lines ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
UW PICO 5.09 File: screenpipe_sync.sh Modified
#!/bin/bash
# screenpipe_sync.sh
# Syncs Screenpipe SQLite data (vision + audio) to a NAS archive database.
# Append-only, no deletions.
#
# Key design points
# -----------------
# 1. Multi-install safe via install_id.
# Source IDs reset to 1 on every screenpipe reinstall. To avoid collisions
# in the NAS archive, every synced table gets an extra `install_id` column,
# and the logical primary key becomes (install_id, id) enforced by a
# unique index. The install_id is a UUID stored in
# ~/.screenpipe/.sync_install_id — wiping ~/.screenpipe/ (which is what
# happens on reinstall) discards it, so the next run generates a new one.
#
# 2. Schema-drift tolerant. If screenpipe migrations add new columns to the
# source DB, the NAS gets ALTER TABLE'd to match. Inserts use explicit
# column lists so positional mismatches can't occur.
#
# 3. FTS caveat. FTS tables in the NAS use source `id` as rowid. After a
# reinstall, INSERT OR IGNORE will silently skip rows whose id collides
# with a previous install's id, so FTS only reliably indexes the most
# recent install. Falls back to LIKE queries on the base tables for
# multi-install searches (which can filter by install_id).
#
# Usage
# -----
# ./screenpipe_sync.sh # syncs yesterday
# ./screenpipe_sync.sh 2026-04-15 # syncs a specific date
# ./screenpipe_sync.sh today # syncs today so far
# ./screenpipe_sync.sh --reset-install-id # rotate install_id and exit
# ./screenpipe_sync.sh --show-install-id # print install_id and exit
set -euo pipefail
# ─── CONFIG ───────────────────────────────────────────────────────────────────
DB_SRC="${SCREENPIPE_DB:-$HOME/.screenpipe/db.sqlite}"
NAS_MOUNT="${NAS_MOUNT:-/Volumes/screenpipe}"
NAS_DB="$NAS_MOUNT/archive.db"
NAS_DATA="$NAS_MOUNT/data"
[ Unknown Command: ^_ ]
^G Get Help ^O WriteOut ^R Read File ^Y Prev Pg ^K Cut Text ^C Cur Pos
^X Exit ^J Justify ^W Where is ^V Next Pg ^U UnCut Text ^T To Spell
DOCKER
Close Tab
DEV (-zsh)
Close Tab
APP (screenpipe")
Close Tab
nano
Close Tab
⌥⌘1
nano...
|
iTerm2
|
nano
|
NULL
|
28051
|